Martensitic Phase Transformation in TRIP-Steel/Mg-PSZ Honeycomb Composite Materials on Mechanical Load

被引：15

作者：

Weigelt, Christian ^{[1
]}

Aneziris, Christos G. ^{[1
]}

Berek, Harry ^{[1
]}

Ehinger, David ^{[2
]}

Martin, Ulrich ^{[2
]}

机构：

[1] Tech Univ Bergakad Freiberg, Inst Ceram Glass & Construct Mat, D-09596 Freiberg, Germany

[2] Tech Univ Bergakad Freiberg, Inst Mat Sci, D-09596 Freiberg, Germany

来源：

ADVANCED ENGINEERING MATERIALS | 2012年 / 14卷 / 1-2期

关键词：

ZIRCONIA;

D O I：

10.1002/adem.201100126

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Composite materials have been in focus of scientific studies since decades. Metal-matrix composites have received extensive attention in the last years. The combination of a metastable austenitic TRIP-steel with magnesia partially stabilized zirconia is presented in this study. The stress induced martensitic phase transformation in both components leads to advantageous mechanical behavior. Raised compression strength as well as increased specific energy absorption on plastic deformation offers a range of structural and crash-absorption applications. Samples with zirconia additions are reinforced by volume increase during tetragonal-monoclinic phase transformation at compressive strains below 35%. The microstructure and phase evolution of partially stabilized zirconia as well as steel has been investigated by EBSD with purpose to correlate mechanical properties with phase evolution.

引用

页码：53 / 60

页数：8

共 50 条

[31] Structure and Mechanical Properties of High-Strength Austenitic-Martensitic Trip-Steel VNS9-Sh
P. S. Kusakin
V. F. Terent’ev
Metal Science and Heat Treatment, 2019, 61 : 10 - 14
[32] Modeling the Local Deformation and Transformation Behavior of Cast X8CrMnNi16-6-6 TRIP Steel and 10% Mg-PSZ Composite Using a Continuum Mechanics-Based Crystal Plasticity Model
Qayyum, Faisal
Guk, Sergey
Schmidtchen, Matthias
Kawalla, Rudolf
Prahl, Ulrich
CRYSTALS, 2020, 10 (03):
[33] Buckling and crush resistance of high-density TRIP-steel and TRIP-matrix composite honeycombs to out-of-plane compressive load
Ehinger, D.
Krueger, L.
Martin, U.
Weigelt, C.
Aneziris, C. G.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2015, 66 : 207 - 217
[34] Ceramic matrix composites based on Mg-PSZ with Cr-Ni-steel-additions with improved thermo-mechanical properties
Wenzel, C.
Aneziris, C. G.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2011, 176 (01): : 32 - 40
[35] Finite element analysis of the effects of martensitic phase transformation in TRIP steel sheet forming
Serri, J
Martiny, M
Ferron, G
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2005, 47 (06) : 884 - 901
[36] Orientation dependence of the martensitic transformation in (Zr,Mg)O2 embedded in a TRIP steel matrix
Becker, H.
Martin, S.
Reichel, B.
Decker, S.
Krueger, L.
Rafaja, D.
MATERIALS TODAY-PROCEEDINGS, 2015, 2 : 727 - 730
[37] Mechanical twinning induced alteration in the kinetics of martensitic phase transformation in TRIP-maraging steels
Gupta, Satyapriya
Ma, Anxin
Hartmaier, Alexander
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2018, 155 : 213 - 224
[38] Effect of sintering temperature on phase transformation behavior and hardness of high-pressure high-temperature sintered 10 mol% Mg-PSZ
Wang, Jian
Chu, Dongliang
Ma, Hongan
Fang, Shuai
Chen, Qi
Liu, Baomin
Ji, Guangyao
Zhang, Zhuangfei
Jia, Xiaopeng
CERAMICS INTERNATIONAL, 2021, 47 (11) : 15180 - 15185
[39] Experimental and numerical study of the mechanical behavior and kinetics of the martensitic transformation in 304L TRIP steel: applied to folding
Sidhoum, Z.
Ferhoum, R.
Almansba, M.
Bensaada, R.
Habak, M.
Aberkane, M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (5-8): : 2757 - 2765
[40] Experimental and numerical study of the mechanical behavior and kinetics of the martensitic transformation in 304L TRIP steel: applied to folding
Z. Sidhoum
R. Ferhoum
M. Almansba
R. Bensaada
M. Habak
M. Aberkane
The International Journal of Advanced Manufacturing Technology, 2018, 97 : 2757 - 2765

← 1 2 3 4 5 →