Triangular nomograms for symmetrical spherical four-bar linkages generating symmetrical coupler curves

被引:2
|
作者
Hwang, WM [1 ]
Chen, KH [1 ]
机构
[1] Natl Cheng Kung Univ, Dept Mech Engn, Tainan 701, Taiwan
关键词
triangular nomograms; spherical four-bar linkage; ymmetrical coupler curves;
D O I
10.1139/tcsme-2005-0008
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The purpose of this paper is to present triangular nomograms for symmetrical spherical four-bar linkages, which provide a simple means to search for the desired symmetrical coupler curves. The dimensional parameters of a symmetrical spherical four-bar linkage are the lengths of the fixed link, turning link, coupler link, and coupler point position. Four types of spherical Grashof linkages tracing symmetrical coupler curves are discussed. Seven kinds of special symmetrical coupler curves are investigated, and the corresponding geometric relations are used to derive the implicit equations consisting of four dimensional parameters. Then, four triangular nomograms for symmetrical spherical four-bar linkages are presented for the selection of dimensional parameters of a linkage generating the desired curve without further calculation.
引用
收藏
页码:109 / 128
页数:20
相关论文
共 50 条
  • [41] Symmetrical coupler curve and singular point classification in planar and spherical swinging-block linkages
    Shirazi, KH
    [J]. JOURNAL OF MECHANICAL DESIGN, 2006, 128 (02) : 436 - 443
  • [42] Algebraic-geometric properties of the coupler curves of the RCCC spatial four-bar mechanism
    Marble, SD
    Pennock, GR
    [J]. MECHANISM AND MACHINE THEORY, 2000, 35 (05) : 675 - 693
  • [43] EQUATIONS FOR COUPLER-GREAT-CIRCLE ENVELOPES OF SPHERICAL FOUR-BAR LINKAGE.
    Chen, Jen-San
    Lee, Jyh-Yang
    [J]. Chung-Kuo Chi Hsueh Kung Ch'eng Hsueh Pao/Journal of the Chinese Society of Mechanical Engineers, 1987, 8 (03): : 189 - 195
  • [44] KINEMATIC ANALYSIS OF SPHERICAL FOUR-BAR LINKAGES VIA THE INFLECTION CUBIC AND THALES ELLIPSE
    Figliolini, Giorgio
    Angeles, Jorge
    [J]. INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2015, VOL 5C, 2016,
  • [45] Static analysis of torque and coupler driven spherical four-bar mechanisms with an applied load
    Perkins, David A.
    Turner, Michael L.
    Murray, Andrew P.
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE 2007, VOL 8, PTS A AND B, 2008, : 519 - 526
  • [46] Design of variable coupler curve four-bar mechanisms
    Soong, Ren-Chung
    Wu, Sun-Li
    [J]. Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 2009, 30 (03): : 249 - 257
  • [47] Design of Variable Coupler Curve Four-bar Mechanisms
    Soong, Ren-Chung
    Wu, Sun-Li
    [J]. JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2009, 30 (03): : 249 - 257
  • [48] Analytical synthesis of function generating spherical four-bar mechanism for the five precision points
    Alizade, RI
    Kilit, Ö
    [J]. MECHANISM AND MACHINE THEORY, 2005, 40 (07) : 863 - 878
  • [49] Finding straight line generators through the approximate synthesis of symmetric four-bar coupler curves
    Baskar, Aravind
    Plecnik, Mark
    Hauenstein, Jonathan D.
    [J]. MECHANISM AND MACHINE THEORY, 2023, 188
  • [50] Synthesis of spherical four-bar mechanisms for two or three prescribed coupler-curve cusps
    Lu, DM
    Hwang, WM
    [J]. JOURNAL OF MECHANICAL DESIGN, 2001, 123 (02) : 247 - 253