Issues relating to numerical modelling of creep crack growth

被引：55

作者：

Yatomi, M. ^{[1
]}

Tabuchi, M. ^{[2
]}

机构：

[1] IHI Corp, Res Lab, Isogo Ku, Yokohama, Kanagawa 2358501, Japan

[2] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan

来源：

ENGINEERING FRACTURE MECHANICS | 2010年 / 77卷 / 15期

关键词：

Creep; Crack growth; FEM; Elevated temperature; C*; Prediction; CONTINUUM DAMAGE; PREDICTION; INITIATION; RUPTURE; STEELS;

D O I：

10.1016/j.engfracmech.2010.04.024

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

In this paper creep crack growth behaviour of P92 welds at 923 K are presented. Creep crack growth behaviour for P92 welds are discussed with C* parameter. Creep crack growth behaviour of P92 welds has been compared with that of P91 welds with C* parameter. NSW and NSW-MOD model were compared with the experimental creep crack growth data. Plane strain NSW model significantly overestimates the crack growth rate, and plane stress NSW model underestimates it. Whilst, NSW-MOD model for plane stress and plane strain conditions gives lower and upper bound of the experimental data, respectively. FE analysis of creep crack growth has been conducted. Constrain effect for welded joints has been examined with C* line integrals of C(T) specimens. As a result, constant C* value using the material data of welded joint gives 10 times lower than that of only HAZ property. Whilst, the predicted CCG rates for welded joint are 10 times higher than those for only HAZ properties. Compared with predicted CCG rate from FE analysis and the experimental CCG rate, it can be suggested that creep crack growth tests for lower load level or for large specimen should be conducted, otherwise the experimental data should give unconservative estimation for components operated in long years. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：3043 / 3052

页数：10

共 50 条

[41] THE EFFECT OF DISCONTINUOUS CRACK IN CREEP CRACK GROWTH TESTS
Kim, Nak Hyun
Kim, Yun Jae
Davies, Catrin M.
Mehmanparast, Ali
Nikbin, Kamran M.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6A: MATERIALS AND FABRICATION, 2014,
[42] Numerical prediction of creep crack growth in different geometries using simplified multiaxial void growth model
Yatomi, M.
Nikbin, K. M.
MATERIALS AT HIGH TEMPERATURES, 2014, 31 (02) : 141 - 147
[43] A numerical simulation of creep-fatigue crack growth in nickel-base superalloys
Piard, A.
Gamby, D.
Carbou, C.
Mendez, J.
Eng. Fract. Mech., 1600, 16-17 (2299-2317):
[44] Experimental and numerical study on the relationship between creep crack growth properties and fracture mechanisms
Tabuchi, M
Ha, JC
Hongo, H
Watanabe, T
Yokobori, T
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (06): : 1757 - 1764
[45] Experimental and numerical study on the relationship between creep crack growth properties and fracture mechanisms
Masaaki Tabuchi
Jechang Ha
Hiromichi Hongo
Takashi Watanabe
Toshimitsu Yokobori
Metallurgical and Materials Transactions A, 2004, 35 : 1757 - 1764
[46] A numerical simulation of creep-fatigue crack growth in nickel-base superalloys
Piard, A
Gamby, D
Carbou, C
Mendez, J
ENGINEERING FRACTURE MECHANICS, 2004, 71 (16-17) : 2299 - 2317
[47] Fatigue crack growth caused by creep
Qinghua Daxue Xuebao/Journal of Tsinghua University, 1996, 36 (07): : 102 - 106
[48] THE INITIATION OF CREEP CRACK-GROWTH
AINSWORTH, RA
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1982, 18 (10) : 873 - 881
[49] CRACK GROWTH AND CREEP IN BRITTLE CERAMICS
HASSELMAN, DP
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1969, 52 (09) : 517 - +
[50] Constraint effects on creep crack growth
Budden, Peter J.
Dean, David W.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 9, 2008, : 289 - 298

← 1 2 3 4 5 →