A novel method for production of spherical Ti-6Al-4V powder for additive manufacturing

被引：99
|
作者：
Sun, Pei [1 ]
Fang, Z. Zak [1 ]
Xia, Yang [1 ]
Zhang, Ying [1 ,2 ]
Zhou, Chengshang [1 ]
机构：
[1] Univ Utah, Dept Met Engn, Salt Lake City, UT 84112 USA
[2] Chinese Acad Sci, Inst Proc Engn, Beijing 100864, Peoples R China
来源：
POWDER TECHNOLOGY | 2016年 / 301卷
关键词：
Titanium; Spherical powder; Additive manufacturing; Powder metallurgy; CALCIOTHERMIC REDUCTION; TITANIUM; METALLURGY; LASER;
D O I：
10.1016/j.powtec.2016.06.022
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
A novel method was developed to produce spherical Ti-6Al-4V powder for advanced near-net-shape manufacturing processes including additive manufacturing and powder injection molding. The new process synergistically integrates a few common low-cost processing techniques including granulation, sintering, and de-oxygenation to produce spherical Ti alloy powders without relying on costly melting and atomizing techniques. This new granulation-sintering-deoxygenation (GSD) process can use low-cost source powders such as scrap Ti as the raw material. The spherical Ti-6Al-4V powder produced using this process has controlled particle size distribution and low oxygen content (<0.15%), which meet the Aerospace Material Specification (AMS-4998) for spherical Ti-6Al-4V powder. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：331 / 335
页数：5
相关论文
共 50 条
  • [31] Oxidation in Reused Powder Bed Fusion Additive Manufacturing Ti-6Al-4V Feedstock: A Brief Review
    Derimow, Nicholas
    Hrabe, Nikolas
    JOM, 2021, 73 (11) : 3618 - 3638
  • [32] Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
    H. P. Tang
    M. Qian
    N. Liu
    X. Z. Zhang
    G. Y. Yang
    J. Wang
    JOM, 2015, 67 : 555 - 563
  • [33] Oxidation in Reused Powder Bed Fusion Additive Manufacturing Ti-6Al-4V Feedstock: A Brief Review
    Nicholas Derimow
    Nikolas Hrabe
    JOM, 2021, 73 : 3618 - 3638
  • [34] Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
    Tang, H. P.
    Qian, M.
    Liu, N.
    Zhang, X. Z.
    Yang, G. Y.
    Wang, J.
    JOM, 2015, 67 (03) : 555 - 563
  • [35] Characterization of the strength of support structures used in powder bed fusion additive manufacturing of Ti-6Al-4V
    Bobbio, Lourdes D.
    Qin, Shipin
    Dunbar, Alexander
    Michaleris, Panagiotis
    Beese, Allison M.
    ADDITIVE MANUFACTURING, 2017, 14 : 60 - 68
  • [36] Laser power implication to the hardness of Ti-6Al-4V powder by using SLM additive manufacturing technology
    Sadali, Mohd Faizal
    Hassan, Mohamad Zaki
    Ahmad, Nurul Huda
    Suhot, Mohamed Azlan
    Mohammad, Roslina
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2020 (MERD'20), 2020, : 45 - 46
  • [37] Quantitative Analysis for the Shape Indicator of Spherical Ti-6Al-4V Powder by Image Analysis Method
    Zou Liming
    Mao Xinhua
    Hu Ke
    Liu Xin
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (03) : 950 - 955
  • [38] Quantitative Analysis for the Shape Indicator of Spherical Ti-6Al-4V Powder by Image Analysis Method
    Zou, Liming
    Mao, Xinhua
    Hu, Ke
    Liu, Xin
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2020, 49 (03): : 950 - 955
  • [39] A Combined Method for Increasing Wear Resistance of Ti-6Al-4V Parts Fabricated by Additive Manufacturing
    Sinyakova, E. A.
    Martynov, S. A.
    Panin, S., V
    Buslovich, D. G.
    OIL AND GAS ENGINEERING (OGE-2020), 2020, 2285
  • [40] Effect of recycled swarf and spherical Ti-6Al-4V feedstocks on laser directed energy deposition additive manufacturing
    Wolff, Sarah
    Haddad, Marwan
    Zhang, Jianyue
    Luo, Alan
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2024, 73 (01) : 193 - 196
12345