Heat transfer and friction characteristics for artificially roughened ducts with compound turbulators

被引：100

作者：

Layek, Apurba ^{[1
]}

Saini, J. S.

Solanki, S. C.

机构：

[1] NIT Durgapur, Dept Mech Engn, Durgapur 713209, India

[2] Indian Inst Technol Roorkee, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2007年 / 50卷 / 23-24期

关键词：

compound-roughness; heat transfer coefficient; friction factor; chamfer angle and groove position;

D O I：

10.1016/j.ijheatmasstransfer.2007.02.042

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

An experimental investigation on heat and fluid flow characteristics of fully developed turbulent flow in a rectangular duct having repeated integral transverse chamfered rib-groove roughness on one broad wall has been carried out. Experiments encompassed the Reynolds number range of 3000-21,000; relative roughness pitch of 4.5-10, chamfer angle of 5 degrees-30 degrees, relative groove position of 0.3-0.6 and relative roughness height of 0.022-0.04. The effect of roughness parameters on Nusselt number and friction factor have been discussed and the results are compared with the results of square rib-grooved and smooth duct under similar flow conditions. The conditions for the best performance have been determined. Correlations for the Nusselt number and friction factor have been developed as a function of roughness parameters and flow Reynolds number. (c) 2007 Elsevier Ltd. All rights reserved.

引用

页码：4845 / 4854

页数：10

共 50 条

[21] Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with broken arc ribs
Hans, V. S.
Gill, R. S.
Singh, Sukhmeet
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2017, 80 : 77 - 89
[22] Effect of duct aspect ratio on heat transfer and friction in steam-cooled ducts with 60° angled rib turbulators
Shui, Linqi
Gao, Jianmin
Shi, Xiaojun
Liu, Jiazeng
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2013, 49 : 123 - 134
[23] Heat transfer and friction factor of discrete V-down rib roughened solar air heater ducts
Singh, Sukhmeet
Chander, Subhash
Saini, J. S.
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2011, 3 (01)
[24] Heat transfer coefficient and friction factor correlations for the transitional flow regime in rib-roughened rectangular ducts
Karwa, R
Solanki, SC
Saini, JS
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1999, 42 (09) : 1597 - 1615
[25] Enhancement of convective heat transfer in rib-roughened rectangular ducts
Sundén, B
JOURNAL OF ENHANCED HEAT TRANSFER, 1999, 6 (2-4) : 89 - 103
[26] Effect of heat transfer and pressure drop characteristics on the performance analysis of an artificially roughened solar air heater
Amit Kumar
Apurba Layek
Heat and Mass Transfer, 2023, 59 : 891 - 907
[27] Experimental study on heat transfer and friction characteristics for hybrid roughened duct used in solar heat collector
Goel, Varun
Sethi, Muneesh
Alam, Tabish
Thakur, Akshay
EXPERIMENTAL HEAT TRANSFER, 2025,
[28] Effect of heat transfer and pressure drop characteristics on the performance analysis of an artificially roughened solar air heater
Kumar, Amit
Layek, Apurba
HEAT AND MASS TRANSFER, 2023, 59 (05) : 891 - 907
[29] Heat transfer and friction factor correlations development for solar air heater duct artificially roughened with 'S' shape ribs
Kumar, Khushmeet
Prajapati, D. R.
Samir, Sushant
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2017, 82 : 249 - 261
[30] Heat transfer and friction correlations for artificially roughened solar air heater duct with discrete W-shaped ribs
Kumar, Arvind
Bhagoria, J. L.
Sarviya, R. M.
ENERGY CONVERSION AND MANAGEMENT, 2009, 50 (08) : 2106 - 2117

← 1 2 3 4 5 →