Mechanical properties and thermomechanical stability of diamond-like carbon films synthesized by pulsed vacuum arc plasma deposition

被引：17
|
作者：
Leng, YX [1 ]
Chen, JY [1 ]
Yang, P [1 ]
Sun, H [1 ]
Wan, GJ [1 ]
Huang, N [1 ]
机构：
[1] SW Jiaotong Univ, Sch Mat Sci & Engn, Chengdu 610031, Peoples R China
来源：
SURFACE & COATINGS TECHNOLOGY | 2003年 / 173卷 / 01期
关键词：
diamond-like carbon; friction; microhardness; pulsed vacuum arc plasma deposition; thermomechanical stability;
D O I：
10.1016/S0257-8972(03)00442-0
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The higher sp(3) bonding fraction hydrogen-free diamond-like carbon (DLC) films were deposited on Si(1 0 0) and Cr17Ni14Cu4 stainless steel substrates by pulsed vacuum arc plasma deposition as a function of bias substrate voltage. The results show that the sp(3) content increases slightly with higher substrate bias and the effective microhardness only increases slightly. The wear resistance of the as-deposited DLC films decreases with increasing substrate bias. The effective hardness of the annealed DLC films diminishes by approximately 20% and the wear resistance decreases after annealing at 400 degreesC due to local adhesion decreases, even though the wear resistance of the annealed DLC films is still much better than that of the Cr17Ni14Cu4 substrate. The thermomechanical stability of hydrogen-free DLC films synthesized by pulsed vacuum arc plasma deposition is better than the DLC films containing hydrogen synthesized by PECVD. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：67 / 73
页数：7
相关论文
共 50 条
  • [41] IONIC FLUX DISTRIBUTIONS FOR THE VACUUM-ARC DEPOSITION OF DIAMOND-LIKE FILMS
    DEAZEVEDO, MD
    MEUNIER, JL
    CHEMICAL ENGINEERING SCIENCE, 1990, 45 (08) : 2475 - 2481
  • [42] Mechanical properties and thermal stability of nitrogen incorporated diamond-like carbon films
    Zou, Y. S.
    Wu, Y. F.
    Huang, R. F.
    Sun, C.
    Wen, L. S.
    VACUUM, 2009, 83 (11) : 1406 - 1410
  • [43] DEPOSITION OF DIAMOND-LIKE CARBON-FILMS BY THE ANODIC ARC TECHNIQUE
    BUCK, V
    ORDE, JBA
    MAUSBACH, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 140 : 770 - 774
  • [44] Correlation of thermal stability of the mechanical and optical properties of diamond-like carbon films
    Franta, Daniel
    Bursikova, Vilma
    Ohlidal, Ivan
    St'ahel, Pavel
    Ohlidal, Miloslav
    Necas, David
    DIAMOND AND RELATED MATERIALS, 2007, 16 (4-7) : 1331 - 1335
  • [45] Microstructure of diamond-like carbon films prepared by cathodic arc deposition
    Kimura, A
    Azuma, Y
    Suzuki, T
    Saito, T
    Ikuhara, Y
    DIAMOND AND RELATED MATERIALS, 2002, 11 (07) : 1436 - 1440
  • [46] PLASMA DEPOSITION AND ETCHING OF DIAMOND-LIKE CARBON-FILMS
    DAVID, M
    PADIYATH, R
    BABU, SV
    AICHE JOURNAL, 1991, 37 (03) : 367 - 376
  • [47] Smooth diamond-like carbon films prepared by cathodic vacuum arc deposition with large glancing angles
    Dai, Wei
    Shi, Yunzhan
    Wang, Qimin
    Wang, Junfeng
    DIAMOND AND RELATED MATERIALS, 2024, 141
  • [48] Structural and thermal stabilities of ultrathin diamond-like carbon films by filtered cathodic vacuum arc deposition
    Chen, Lianhua
    Che, Xiaozhou
    Wang, Ping
    Ma, Hongtao
    Fang, Hongxin
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2009, 29 (03): : 318 - 323
  • [49] Characterization of the mechanical properties of diamond-like carbon films
    Cho, SJ
    Chung, JW
    Lee, KR
    DIAMOND AND RELATED MATERIALS, 2005, 14 (08) : 1270 - 1276
  • [50] Pulsed laser deposition and laser machining of diamond-like carbon films
    Martellucci, S
    Messina, G
    Paoletti, A
    Richetta, M
    Santangelo, S
    Spena, A
    Tebano, A
    Tucciarone, A
    SECOND GR-I INTERNATIONAL CONFERENCE ON NEW LASER TECHNOLOGIES AND APPLICATIONS, 1998, 3423 : 302 - 308
12345