Influence of Number of Turns Per Coil in Fractional-Slot PM Brushless Machines

被引：0
|
作者：
Al-Habshi, S. M. [1 ]
Jamil, M. L. Mohd [1 ]
Othman, M. N. [1 ]
Jidin, A. [1 ]
Ab Karim, K. [1 ]
Zolkapli, Z. Z. [1 ]
机构：
[1] Univ Teknikal Malaysia Melaka, Power Elect & Drives Res Grp PEDG, Durian Tunggal 76100, Melaka, Malaysia
来源：
2014 IEEE CONFERENCE ON ENERGY CONVERSION (CENCON) | 2014年
关键词：
fractional-slot; asymmetric disposition; unbalanced magnetic force; torque;
D O I：
暂无
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
An investigation of electromagnetic performance on fractional-slot PM Brushless Machines which slot-number and pole-number differs by one using 2-D finite-element analysis is presented. The investigation is motivated by the rise of Unbalanced Magnetic Force (UMF) resulted by asymmetric disposition of phase windings. It can be seen that a significant reduction of UMF is possibly achieved by employing uneven number of turns per coil. However, a slight reduction of torque performance exists which could be due to higher saturation on stator magnetic path at rated condition. It is also shown that the significant reduction of UMF is mainly due to the reduction of radial force density component while the tangential force density component remains unchanged.
引用
收藏
页码：146 / 151
页数：6
相关论文
共 50 条
  • [21] Analytical Modelling and Finite Element Computation of Radial Vibration Force in Fractional-Slot Permanent Magnet Brushless Machines
    Zhu, Z. Q.
    Xia, Z. P.
    Wu, L. J.
    Jewell, G. W.
    2009 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE, VOLS 1-3, 2009, : 144 - 151
  • [22] Investigation of Torque-Speed Characteristics and Cogging Torque of Fractional-Slot IPM Brushless AC Machines Having Alternate Slot Openings
    Azar, Ziad
    Zhu, Z. Q.
    Ombach, Grzegorz
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2012, 48 (03) : 903 - 912
  • [23] Synthesis of High Performance Fractional-Slot Permanent-Magnet Machines With Coil-Pitch of Two Slot-Pitches
    Wang, K.
    Zhu, Z. Q.
    Ombach, G.
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2014, 29 (03) : 758 - 770
  • [24] Torque Ripple Reduction in Fractional-Slot Interior PM Machines Optimizing the Flux-Barrier Geometries
    Barcaro, Massimo
    Bianchi, Nicola
    2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2012, : 1496 - 1502
  • [25] Reduction of Eddy-Current Losses in Fractional-Slot Concentrated-Winding Synchronous PM Machines
    Choi, Gilsu
    Jahns, Thomas M.
    IEEE TRANSACTIONS ON MAGNETICS, 2016, 52 (07)
  • [26] Comparison of Interior and Surface PM Machines Equipped With Fractional-Slot Concentrated Windings for Hybrid Traction Applications
    Reddy, Patel B.
    El-Refaie, Ayman M.
    Huh, Kum-Kang
    Tangudu, Jagadeesh K.
    Jahns, Thomas M.
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2012, 27 (03) : 593 - 602
  • [27] Comparison of Interior and Surface PM Machines Equipped with Fractional-Slot Concentrated Windings for Hybrid Traction Applications
    Reddy, Patel. B.
    El-Refaie, Ayman
    Huh, Kum-Kang
    Tangudu, Jagadeesh K.
    Jahns, Thomas. M.
    2011 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2011, : 2252 - 2259
  • [28] Comparative Study of Voltage Distortion in Fractional-Slot PM Machines Having Different Winding and Stator Configurations
    Li, Y. X.
    Zhu, Z. Q.
    Li, Guangjin
    2016 ELEVENTH INTERNATIONAL CONFERENCE ON ECOLOGICAL VEHICLES AND RENEWABLE ENERGIES (EVER), 2016,
  • [29] Fractional-slot PM motors for electric power steering systems
    Bianchi, N.
    Bolognani, S.
    International Journal of Vehicle Autonomous Systems, 2004, 2 (3-4) : 189 - 200
  • [30] Design considerations for fractional-slot winding configurations of synchronous machines
    Bianchi, Nicola
    Bolognani, Silverio
    Pre, Michele Dai
    Grezzani, Giorgio
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2006, 42 (04) : 997 - 1006
12345