The evolution of microstructure due to heat treatment on highly porous copper/silver systems

被引：0
|
作者：
Murtha, Brian A. [1 ]
Kulkarni, Anil K.
Singh, Jogender [1 ]
机构：
[1] Penn State Univ, Dept Eng Sci & Mech, University Pk, PA 16801 USA
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 8, PTS A AND B: HEAT TRANSFER, FLUID FLOWS, AND THERMAL SYSTEMS | 2008年
关键词：
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The sintering phenomenon is examined in highly porous materials by first cold pressing powdered copper and silver and separately heat treating them in an un-pressurized furnace. The initial microstructure prior to heat treatment as compared to that after heat treatment showed similar characteristics regardless of the material or powder geometry. However after heat treatment, there are significantly different microstructures among samples. The microstructures depend on the maximum furnace temperature, the particle geometry, material composition, and the particle surface area. While the microstructures change significantly, there is no change in porosity between pre- and post- heat treated samples.
引用
收藏
页码：971 / 977
页数：7
相关论文
共 50 条
  • [1] Effects of heat treatment on thermal conductivity of highly porous copper/silver systems
    Murtha, Brian A.
    Kulkarni, Anil K.
    Singh, Jogender
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 8, PTS A AND B: HEAT TRANSFER, FLUID FLOWS, AND THERMAL SYSTEMS, 2008, : 979 - 987
  • [2] Oxide and Heat Treatment Microstructure Evolution of Melted Mark on Copper Wire under Various Heat Treatment Conditions
    Sachana, Suphattra
    Morishita, Kohei
    Miyahara, Hirofumi
    MATERIALS TRANSACTIONS, 2023, 64 (09) : 2302 - 2308
  • [3] Oxide and Heat Treatment Microstructure Evolution of Melted Mark on Copper Wire under Various Heat Treatment Conditions
    Sachana, Suphattra
    Morishita, Kohei
    Miyahara, Hirofumi
    Materials Transactions, 2023, 64 (10): : 2302 - 2308
  • [4] Heat transfer enhancements in heat pipe constructed with a copper porous microstructure
    Ling, Yang Dong
    Torii, Shuichi
    INTERNATIONAL JOURNAL OF GREEN ENERGY, 2021, 18 (02) : 166 - 171
  • [5] Evolution of Microstructure, Mechanical Properties and Residual Stress of a Cold Rolled Invar Sheet Due to Heat Treatment
    Park, Sung Jin
    Jo, Seong-Hyeon
    Kim, Jung Gi
    Kim, Juntae
    Lee, Ryul
    Oh, Young-Seok
    Kim, Se-Jong
    Lee, Ho Won
    Kang, Seong-Hoon
    Jung, Jaimyun
    METALS, 2022, 12 (01)
  • [6] Microstructure evolution of the air-hardening steel LH800 (R) due to heat treatment
    Schaper, M.
    Grydin, O.
    Nuernberger, F.
    HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2013, 68 (01): : 42 - 48
  • [7] Microstructure evolution and rejuvenation heat treatment of service superalloy
    Dong, Jian
    Zhou, Yu
    Zhang, Zheng
    Zhao, Zi-Hua
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2013, 34 (08): : 95 - 99
  • [8] Effect of Copper and Heat Treatment on Microstructure of Austempered Ductile Iron
    Nikša Čatipović
    Dražen Živković
    Zvonimir Dadić
    Petar Ljumović
    Transactions of the Indian Institute of Metals, 2021, 74 : 1455 - 1468
  • [9] Effect of Copper and Heat Treatment on Microstructure of Austempered Ductile Iron
    Catipovic, Niksa
    Zivkovic, Drazen
    Dadic, Zvonimir
    Ljumovic, Petar
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (06) : 1455 - 1468
  • [10] The Effect of Heat Treatment on Microstructure and Performance of Die Forging Copper
    Yang, Gui-rong
    Song, Wen-ming
    Ma, Ying
    Hao, Yuan
    MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 58 - 61
12345