Input voltage sensorless average current control technique for high-power-factor boost rectifiers operated in discontinuous conduction mode

被引：0
|
作者：
Ghosh, R [1 ]
Narayanan, G [1 ]
机构：
[1] Indian Inst Sci, Dept Elect Engn, Power Elect Grp, Bangalore 560012, Karnataka, India
来源：
APEC 2005: Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, Vols 1-3 | 2005年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A simple, low-cost analog controller is proposed for average current mode control of highpower-factor boost rectifiers operated in the discontinuous conduction mode (DCM). The current shaping is based on comparison of the input current with a suitably generated periodic nonlinear carrier. The controller does not need input voltage sensing, error amplifier in the current-shaping loop and/or any multiplication / division operation. The performance of the proposed controller is comparable to those of existing schemes. The controller may be fabricated into a single integrated circuit. A 600W rectifier is simulated in MATLAB/SIMULINK. The control concept is experimentally validated on a 600W laboratory prototype.
引用
收藏
页码：1145 / 1151
页数：7
相关论文
共 50 条
  • [21] Passive input current ripple cancellation in three-phase discontinuous conduction mode rectifiers
    Barbosa, P
    Canales, F
    Lee, F
    PESC 2001: 32ND ANNUAL POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-4, CONFERENCE PROCEEDINGS, 2001, : 1019 - 1024
  • [22] High-power-factor electronic ballast operating in critical conduction mode
    Universidade Federal do Espirito, Santo, Vitoria, Brazil
    IEEE Trans Power Electron, 1 (93-101):
  • [23] Sensorless power factor control for mixed conduction mode boost converter using passivity-based control
    Cimini, Gionata
    Ippoliti, Gianluca
    Orlando, Giuseppe
    Pirro, Matteo
    IET POWER ELECTRONICS, 2014, 7 (12) : 2988 - 2995
  • [24] Sliding-mode-control design of a high-power-factor buck-boost rectifier
    López, O
    de Vicuña, LG
    Castilla, M
    Matas, J
    López, M
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 1999, 46 (03) : 604 - 612
  • [25] Sensorless Passivity-Based Control for Mixed Conduction Mode Boost Converter with Power Factor Correction
    Cimini, Gionata
    Ippoliti, Gianluca
    Orlando, Giuseppe
    Pirro, Matteo
    2013 INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY RESEARCH AND APPLICATIONS (ICRERA), 2013, : 1194 - 1199
  • [26] High-power-factor electronic ballast operating in critical conduction mode
    Co, MA
    Simonetti, DSL
    Vieira, JLF
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 1998, 13 (01) : 93 - 101
  • [27] Sinusoidal Input Current Discontinuous Conduction Mode Control of the VIENNA Rectifier
    Leibl, Michael
    Kolar, Johann W.
    Deuringer, Josef
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2017, 32 (11) : 8800 - 8812
  • [28] Analysis and improvement of input current waveforms for discontinuous-mode boost converter with unity power factor
    Taniguchi, K
    Nakaya, Y
    PROCEEDINGS OF THE POWER CONVERSION CONFERENCE - NAGAOKA 1997, VOLS I AND II, 1997, : 399 - 404
  • [29] DESIGN OF THE CLAMPED-CURRENT HIGH-POWER-FACTOR BOOST RECTIFIER
    MAKSIMOVIC, D
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1995, 31 (05) : 986 - 992
  • [30] A voltage sensorless control method to balance the input current of the boost rectifier under unbalanced input voltage condition
    Chattopadhyay, S
    Ramanarayanan, V
    PESC'02: 2002 IEEE 33RD ANNUAL POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-4, CONFERENCE PROCEEDINGS, 2002, : 1941 - 1946
12345