Fabrication of Fe-Based Al2O3-TiC Ceramic/Steel Composite by Self-Propagation High-Temperature Synthesis

被引：0

作者：

Zhai Chuanxin ^{[1
]}

Li Yan ^{[1
]}

Wang Xinyang ^{[1
]}

Xu Liujie ^{[2
]}

Wei Shizhong ^{[2
]}

机构：

[1] Henan Univ Sci & Technol, Mat Sci & Eng Coll, Luoyang 471003, Peoples R China

[2] Henan Engn Res Ctr Wear Mat, Luoyang 471003, Peoples R China

来源：

CHINESE CERAMICS COMMUNICATIONS | 2010年 / 105-106卷

关键词：

Self-propagating High-temperature Synthesis; Al2O3; TiC;

D O I：

10.4028/www.scientific.net/AMR.105-106.495

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The Fe-Based Al2O3-TiC Ceramic Composite was fabricated by combining the methods of Self-propagating High-temperature Synthesis with casting. The microstructures of ceramic layer and interface were characterized via SEM, EDS and X-ray diffraction. The Results show that the microstructure of ceramic layer is dense, and the in-situ Al2O3 and TiC particles with size of 1-2 mu m are distributed on the ferrite matrix. The hardness of compact ceramic layer reaches 48HRC, and it has graded distribution from ceramic layer to the ferrite matrix. The composite interface between ceramic and matrix is compact, and takes on flexuous. The composite material bonds in a metallographic manner, with high bonding strength.

引用

页码：495 / +

页数：2

共 50 条

[21] Influence of rare earth on the properties of Al2O3-TiC/Fe based metal ceramic materials
School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333000, China
Rengong Jingti Xuebao, 5 (1257-1262):
[22] Friction and wear properties of Al2O3-TiC/Al2O3- TiC-CaF2 composite laminated ceramic
Yang, X. (me_yangxf@ujn.edu.cn), 1600, Beijing University of Aeronautics and Astronautics (BUAA) (30):
[23] Fabrication of highly efficient dicing blade for cutting Al2O3-TiC composite
Adachi, Takuya
Matsumaru, Koji
Ishizaki, Kozo
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2006, 114 (1328) : 336 - 340
[24] Selective laser sintering of TiC-Al2O3 composite with self-propagating high-temperature synthesis
Slocombe, A
Li, L
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 118 (1-3) : 173 - 178
[25] The Effect of TiC Content and Sintering Temperature on Mechanical Property of Al2O3-TiC Composite Ceramics
柳军旺
郭英奎
石春艳
哈尔滨理工大学学报, 2008, (06) : 114 - 116
[26] SYNTHESIS OF AL2O3-TIC AND AL2O3-TIB2 COMPOSITE POWDERS BY COMBUSTION METHOD
LIANG, S
SZEPVOLGYI, J
ZHENG, Z
HIGH TEMPERATURE AND MATERIALS SCIENCE, 1995, 34 (1-3): : 233 - 239
[27] Diffusion bonding of Al2O3-TiC composite ceramic and W18Cr4V high speed steel in vacuum
Shen, Xiaoqin
Yajiang, Li
Juan, Wang
Wanqun, Huang
Fusheng, Yu
VACUUM, 2009, 84 (03) : 378 - 381
[28] Wear development on wiper Al2O3-TiC mixed ceramic tools in hard machining of high strength steel
Grzesik, W.
WEAR, 2009, 266 (9-10) : 1021 - 1028
[29] Fabrication In Situ TiB2-TiC-Al2O3 Multiple Ceramic Particles Reinforced Fe-Based Composite Coatings by Gas Tungsten Arc Welding
Wang, X. H.
Zhang, M.
Du, B. S.
TRIBOLOGY LETTERS, 2011, 41 (01) : 171 - 176
[30] A Self-propagating high-temperature synthesis process for the fabrication of Fe(Cr)–Al2O3 nanocomposite
Seyed Esmaiel Shakib
Ramin Raiszadeh
Jalil Vahdati-Khaki
InternationalJournalofMineralsMetallurgyandMaterials, 2019, 26 (06) : 775 - 786

← 1 2 3 4 5 →