CALCULATION OF CRITICAL HEAT FLUX USING AN INVERSE HEAT TRANSFER METHOD TO SUPPORT TREAT EXPERIMENT ANALYSIS

被引：0
|
作者：
Armstrong, Robert [1 ]
Folsom, Charles [1 ]
Hill, Connie [1 ]
Jensen, Colby [1 ]
机构：
[1] Idaho Natl Lab, Idaho Falls, ID 83415 USA
来源：
PROCEEDINGS OF THE 2020 INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING (ICONE2020), VOL 3 | 2020年
关键词：
Transient boiling; CHF; heat transfer; TREAT;
D O I：
暂无
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
Heat transfer between cladding and coolant during transient scenarios remains a critical area of uncertainty in understanding nuclear reactor safety. To advance the understanding of transient and accident scenarios involving critical heat flux (CHF), an in-pile experiment for the Transient Reactor Test facility (TREAT) at Idaho National Laboratory (INL) was developed. The experiment, named CHF-Static Environment Rodlet Transient Test Apparatus (CHF-SERTTA), consists of a hollow borated stainless-steel heater rod submerged in a static water pool heated via the (n, a) reaction in boron-10. This paper presents a novel inverse heat transfer method to determine CHF by using the optimization and uncertainty software Dakota to calibrate a RELAP5-3D model of CHF-SERTTA to temperature measurements obtained from a thermocouple welded to the surface of the rod.
引用
收藏
页数：7
相关论文
共 50 条
  • [21] Semianalytic method for heat transfer calculation in the liquid film under conditions of a constant heat flux on the wall
    S. P. Aktershev
    M. V. Bartashevich
    E. A. Chinnov
    High Temperature, 2017, 55 : 107 - 113
  • [22] Enhancement of the critical heat flux by using heat spreader
    Yong-Sik Yoon
    Hyup Yang
    Ho-Young Kwak
    KSME International Journal, 2003, 17 : 1063 - 1072
  • [23] Estimating net heat flux from surrogate firebrand accumulations using an inverse heat transfer approach
    Thomas, J. Christian
    Mueller, Eric, V
    Hadden, Rory M.
    ADVANCES IN FOREST FIRE RESEARCH 2018, 2018, : 769 - 779
  • [24] Estimation of end-quench heat transfer coefficients using an inverse heat transfer analysis
    Hernández-Morales, B
    Ingalis-Cruz, A
    Barrera-Godínez, JA
    Colás, R
    HEAT TREATING, VOLS 1 AND 2, PROCEEDINGS, 2000, : 719 - 726
  • [25] Surface wettability effects on critical heat flux of boiling heat transfer using nanoparticle coatings
    Hsu, Chin-Chi
    Chen, Ping-Hei
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (13-14) : 3713 - 3719
  • [26] Inverse heat transfer methods for global heat flux measurements in aerothermodynamics testing
    Liu, Tianshu
    Montefort, Javier
    Stanfield, Scott
    Palluconi, Steve
    Crafton, Jim
    Cai, Zemin
    PROGRESS IN AEROSPACE SCIENCES, 2019, 107 : 1 - 18
  • [27] Heat flux estimation in an infrared experimental furnace using an inverse method
    Le Bideau, P.
    Ploteau, J. P.
    Glouannec, P.
    APPLIED THERMAL ENGINEERING, 2009, 29 (14-15) : 2977 - 2982
  • [28] Estimation of the transient surface temperature, heat flux and effective heat transfer coefficient of a slab in an industrial reheating furnace by using an inverse method
    Wikstrom, Patrik
    Blasiak, Wlodzimierz
    Berntsson, Fredrik
    STEEL RESEARCH INTERNATIONAL, 2007, 78 (01) : 63 - 70
  • [29] A calculation method of the sensible heat flux by sodar
    Lu Naiping
    ActaOceanologicaSinica, 1989, (02) : 191 - 198
  • [30] Investigating heat transfer augmentation using gradient heat flux measurement and PIV method
    Mityakov, Andrey
    Babich, Aleksandr
    Bashkatov, Aleksandr
    Gusakov, Andrey
    Dymkin, Aleksey
    Zainullina, Elza
    Sapozhnikov, Sergey
    Mityakov, Vladimir
    Seroshtanov, Vladimir
    XXXIII SIBERIAN THERMOPHYSICAL SEMINAR (STS-33), 2017, 115
12345