共 50 条
- [21] The reliability analysis of the velocity ratio of coal cutting to support moving in fully mechanized top-coal caving face [J]. Luo, S.-M., 2001, Xiangtan Mining Institute (16):
- [24] Spot testing on mechanical characteristics of surrounding rock in gates of fully mechanized top-coal caving face [J]. Zhongguo Kuangye Daxue Xuebao, 2006, 1 (94-98):
- [25] Formation mechanism of overburden bed separation in fully mechanized top-coal caving [J]. Meitan Xuebao/Journal of the China Coal Society, 2016, 41 : 342 - 349
- [26] Study on zone failure characteristics of top-coal in fully-mechanized top-coal caving mining of thick coal seam [J]. Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (07): : 99 - 107
- [27] The Basic Problems about Fully-Mechanized Top-coal Caving System [J]. ADVANCES IN CIVIL ENGINEERING II, PTS 1-4, 2013, 256-259 : 518 - +
- [28] Effect of Face Length in Initial Mining Stage of Fully Mechanized Top-Coal Caving Face with Large Mining Height [J]. Geotechnical and Geological Engineering, 2022, 40 : 711 - 722
- [29] A study of the rib fall mechanism in soft coal and its control at a fully-mechanized top-coal caving face [J]. Zhongguo Kuangye Daxue Xuebao/Journal of China University of Mining and Technology, 2009, 38 (05): : 640 - 644
- [30] Boundary quantitative characterization of the top-coal limit equilibrium zone in fully mechanized top-coal caving stope along the strike direction of working face [J]. SCIENTIFIC REPORTS, 2024, 14 (01):