Microstructure and Impact Resistance Analysis of 7075 Aluminum Alloy Modified by FSP

被引：1
|
作者：
Liu, Shengrong [1 ,2 ]
Xu, Feng [1 ]
Wang, Jianli [2 ]
Wang, Hongfeng [2 ]
Ge, Xiaole [2 ]
Pu, Jiafei [2 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing, Peoples R China
[2] Huangshan Univ, Coll Mech & Elect Engn, Huangshan, Peoples R China
来源：
INTEGRATED FERROELECTRICS | 2020年 / 209卷 / 01期
基金：
中国国家自然科学基金;
关键词：
Friction stir processing; impact toughness; microstructure; 7075 aluminum alloy; fracture morphology; FRICTION; BEHAVIOR;
D O I：
10.1080/10584587.2020.1728806
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The hot rolled 7075 aluminum alloy was modified by friction stir processing (FSP) technology, and the effects of different processing parameters on impact toughness and microstructure of machining region were analyzed. The results showed that the impact toughness of machining region was 2.3 times that of the base metal when the rotation velocity was 1200 r/min and the feed rate was 60 mm/min, which much higher than base metal. The fracture morphology was observed by using scanning electron microscope and found that the morphology of fracture dimple was uniform and smooth. The grains in the weld nugget zone were obviously refined after friction stir processing, and the grain refinement effects were not the same in different processing parameters.
引用
收藏
页码：40 / 47
页数：8
相关论文
共 50 条
  • [41] Electron beam welding of 7075 aluminum alloy: Microstructure and fracture properties
    Hayat, Fatih
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2022, 34
  • [42] Microstructure and mechanical properties of a novel Sc and Zr modified 7075 aluminum alloy prepared by selective laser melting
    Bi, Jiang
    Lei, Zhenglong
    Chen, Yanbin
    Chen, Xi
    Tian, Ze
    Liang, Jingwei
    Zhang, Xinrui
    Qin, Xikun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 768
  • [43] Microstructure and RRA Treatment of LFEC 7075 Aluminum Alloy Extruded Bars
    王高松
    ZHAO Zhihao
    CUI Jianzhong
    GUO Qiang
    Journal of Wuhan University of Technology(Materials Science), 2013, (01) : 184 - 191
  • [44] Microstructure evolution and mechanical properties of backward thixoextruded 7075 aluminum alloy
    Rokni, M. R.
    Zarei-Hanzaki, A.
    Abedi, H. R.
    Haghdadi, N.
    MATERIALS & DESIGN, 2012, 36 : 557 - 563
  • [45] Microstructure and RRA treatment of LFEC 7075 aluminum alloy extruded bars
    Gaosong Wang
    Zhihao Zhao
    Jianzhong Cui
    Qiang Guo
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2013, 28 : 184 - 191
  • [46] Effects of Heat Treatment Pulse on Microstructure and Mechanical Properties of 7075 Aluminum Alloy Resistance Spot Welding Joints
    Li, Guowei
    Liu, Xinyu
    Liang, Yahong
    Wang, Yinshuang
    Yang, Dawei
    Li, Jie
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [47] The impact of zirconia nanoparticles on the mechanical characteristics of 7075 aluminum alloy
    Al Zubaidi, Faten N.
    Asaad, Lamyaa Mahdi
    Alshalal, Iqbal
    Rasheed, Mohammed
    JOURNAL OF THE MECHANICAL BEHAVIOR OF MATERIALS, 2023, 32 (01)
  • [48] Electrochemical analysis of 7075 aluminum alloy during retrogression
    Su R.-M.
    Wang L.
    Li G.-L.
    Qu Y.-D.
    Li R.-D.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2022, 32 (03): : 670 - 678
  • [49] Analysis and experiment of 7075 aluminum alloy tensile test
    Chen, Dyi-Cheng
    You, Ci-Syong
    Gao, Fu-Yuan
    11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 1252 - 1258
  • [50] Microstructure evolution and properties of 7075 aluminum alloy recycled from scrap aircraft aluminum alloys
    Lin, Rui
    Liu, Bo
    Zhang, Junjie
    Zhang, Shengen
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 19 : 354 - 367
12345