Experimental study on surface roughness and dimensional accuracy of hole machining process on GFRP composites using abrasive water jet technique

被引：18
|
作者：
Prasad, K. Siva [1 ]
Chaitanya, G. [2 ]
机构：
[1] VR Siddhartha Engn Coll, Dept Mech Engn, Vijayawada 520007, India
[2] RVR & JC Coll Engn, Dept Mech Engn, Guntur 522019, Andhra Pradesh, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 23卷
关键词：
Abrasive water jet machining; Drilling; Dimensional accuracy; Surface roughness; GFRP composites; OPTIMIZATION; PARAMETERS;
D O I：
10.1016/j.matpr.2019.05.463
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Abrasive water jet machining (AWJM) is a non-conventional machining process, which is employed for difficult-to-machining of thin, hard and brittle materials. This experimental study reports the influence of process parameters on the surface roughness and dimensional accuracy when drilling of GFRP composites using abrasive water jet technique. In particular, investigated the effects of abrasive flow rate, pressure, standoff distance and fiber orientation on hole quality were examined. Experimental results revealed that standoff distance and fiber orientation has major effect on surface roughness and dimensional accuracy. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：651 / 658
页数：8
相关论文
共 50 条
  • [21] An Experimental Study of the Abrasive Water jet Micro-Machining Process for Quartz Crystals
    Qi, H.
    Fan, J. M.
    Wang, J.
    [J]. ADVANCES IN ABRASIVE TECHNOLOGY XV, 2012, 565 : 339 - 344
  • [22] Experimental Study on Abrasive Water Jet Machining of PZT Ceramic
    Dhanawade, Ajit
    Upadhyai, Ravi
    Rouniyar, Arunkumar
    Kumar, Shailendra
    [J]. 2ND INTERNATIONAL CONFERENCE ON MEASUREMENT INSTRUMENTATION AND ELECTRONICS, 2017, 870
  • [23] Hybrid GR-SVM for prediction of surface roughness in abrasive water jet machining
    Ashanira Mat Deris
    Azlan Mohd Zain
    Roselina Sallehuddin
    [J]. Meccanica, 2013, 48 : 1937 - 1945
  • [24] Optimization of process parameters on surface roughness during drilling of GFRP composites using taguchi technique
    Prasad, K. Siva
    Chaitanya, G.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 1553 - 1558
  • [25] Hybrid GR-SVM for prediction of surface roughness in abrasive water jet machining
    Deris, Ashanira Mat
    Zain, Azlan Mohd
    Sallehuddin, Roselina
    [J]. MECCANICA, 2013, 48 (08) : 1937 - 1945
  • [26] Study the parametric effect of abrasive water jet machining on surface roughness of Inconel 718 using RSM-BBD techniques
    Kumar, Arvind
    Singh, Hari
    Kumar, Vinod
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2018, 33 (13) : 1483 - 1490
  • [27] Evaluation of machining performance of pineapple filler based reinforced polymer composites using abrasive water jet machining process
    Jagadish
    Gupta, Kapil
    Rajakumaran, Maran
    [J]. CONFERENCE OF THE SOUTH AFRICAN ADVANCED MATERIALS INITIATIVE (COSAAMI-2018), 2018, 430
  • [28] Experimental Investigation for the Prediction of Surface Roughness Height Parameters in Abrasive Water Jet Cutting of Kevlar/epoxy Composites
    Gubencu, Dinu-Valentin
    [J]. MATERIALE PLASTICE, 2023, 60 (03) : 94 - 105
  • [29] Experimental and numerical study on abrasive water jet machining of laminated glass
    Vedrtnam, Ajitanshu
    Gunwant, Dheeraj
    Chaturvedi, Shashkant
    Sagar, Dheeraj
    Pawar, S. J.
    [J]. GLASS TECHNOLOGY-EUROPEAN JOURNAL OF GLASS SCIENCE AND TECHNOLOGY PART A, 2021, 62 (02): : 65 - 74
  • [30] Experimental study on abrasive water jet machining of carbon epoxy composite
    Dhanawade, Ajit
    Kumar, Puneet
    Kumar, Shailendra
    [J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2020, 6 (01) : 40 - 53
12345