Experimental study on surface roughness and dimensional accuracy of hole machining process on GFRP composites using abrasive water jet technique

被引：18
|
作者：
Prasad, K. Siva [1 ]
Chaitanya, G. [2 ]
机构：
[1] VR Siddhartha Engn Coll, Dept Mech Engn, Vijayawada 520007, India
[2] RVR & JC Coll Engn, Dept Mech Engn, Guntur 522019, Andhra Pradesh, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 23卷
关键词：
Abrasive water jet machining; Drilling; Dimensional accuracy; Surface roughness; GFRP composites; OPTIMIZATION; PARAMETERS;
D O I：
10.1016/j.matpr.2019.05.463
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Abrasive water jet machining (AWJM) is a non-conventional machining process, which is employed for difficult-to-machining of thin, hard and brittle materials. This experimental study reports the influence of process parameters on the surface roughness and dimensional accuracy when drilling of GFRP composites using abrasive water jet technique. In particular, investigated the effects of abrasive flow rate, pressure, standoff distance and fiber orientation on hole quality were examined. Experimental results revealed that standoff distance and fiber orientation has major effect on surface roughness and dimensional accuracy. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：651 / 658
页数：8
相关论文
共 50 条
  • [1] Numerical optimization of hole making in GFRP composite using abrasive water jet machining process
    Ibraheem, Hussein Mohammed Ali
    Iqbal, Asif
    Hashemipour, Majid
    [J]. JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, 2015, 38 (01) : 66 - 76
  • [2] Selection of optimal process parameters by Taguchi method for Drilling GFRP composites using Abrasive Water jet machining Technique
    Prasad, K. Siva
    Chaitanya, G.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 19714 - 19722
  • [3] An Experimental Study on Composites Machining Using Abrasive Water Jet Technology
    Cen Haitang
    Chi Luxing
    Li Hui
    [J]. PROGRESS OF MACHINING TECHNOLOGY, 2009, 407-408 : 582 - 585
  • [4] Experimental Exploration on Surface Roughness in Abrasive Water Jet machining using Response Surface Methodology
    Kumar, S. Venkata Ravi
    Muniappan, A.
    Bharathiraja, G.
    Karunagaran, N.
    [J]. 3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
  • [5] Prediction of surface roughness in abrasive water jet machining of CFRP composites using regression analysis
    Kumaran, S. Thirumalai
    Ko, Tae Jo
    Uthayakumar, M.
    Islam, Md. Mofizul
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 724 : 1037 - 1045
  • [6] Effect of the Process Parameters on Machining of GFRP Composites for Different Conditions of Abrasive Water Suspension Jet Machining
    K. Ramesha
    N. Santhosh
    K. Kiran
    N. Manjunath
    H. Naresh
    [J]. Arabian Journal for Science and Engineering, 2019, 44 : 7933 - 7943
  • [7] Effect of the Process Parameters on Machining of GFRP Composites for Different Conditions of Abrasive Water Suspension Jet Machining
    Ramesha, K.
    Santhosh, N.
    Kiran, K.
    Manjunath, N.
    Naresh, H.
    [J]. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2019, 44 (09) : 7933 - 7943
  • [8] Abrasive Jet Machining for Micro-hole Drilling on Glass and GFRP Composites
    Suresh, R.
    Reddy, Sohit K.
    Shapur, Karthik
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 5757 - 5761
  • [9] A study on material removal rate and surface roughness of abrasive water jet machining process on hybrid metal matrix composites using response surface methodology
    Shunmugasundaram M.
    Praveenkumar A.
    Sankar L.P.
    Sivasankar S.
    [J]. International Journal of Vehicle Structures and Systems, 2021, 13 (02) : 200 - 205
  • [10] Experimental investigation on material removal rate during abrasive water jet machining of GFRP composites
    Tripathi, Dharmagna R.
    Vachhani, Krupang H.
    Kumari, Soni
    Dinbandhu
    Abhishek, Kumar
    [J]. MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 1389 - 1392
12345