Mechanical and microstructural properties of dissimilar friction spot welded aluminum alloy

被引：0
|
作者：
Chun, Chang-Keun [1 ]
Kim, Heung-Ju [1 ]
Cho, Hyeon-Jin [1 ]
Kim, Teuk-ki [1 ]
Chang, Woong-Seong [1 ]
机构：
[1] Res Inst Ind Sci & Technol, Welding Res Ctr, Pohang 790600, South Korea
来源：
ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY | 2008年 / 580-582卷
关键词：
dissimilar; friction spot joining; aluminum alloys; Al5052; Al; 6022;
D O I：
10.4028/www.scientific.net/MSF.580-582.389
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Dissimilar friction spot lap joining of Al5052 and Al6022 sheet has been investigated using a combination of joining parameters, thickness and upper plate material. The joining parameters such as tool rotating speed, plunging depth and joining time have been considered. The maximum tensile shear strength has been observed at tool rotating speed of 1000rpm, dwell time of 2.5sec, plunging depth of 1.8 mm and Al 6022 as upper plate. The maximum tensile shear fractured load of the joint was about 80% of that of the similar Al 5052 alloys joint.
引用
收藏
页码：389 / 392
页数：4
相关论文
共 50 条
  • [11] Microstructural and Mechanical Properties of Friction Stir Welded Nickel-Aluminum Bronze (NAB) Alloy
    T. Küçükömeroğlu
    E. Şentürk
    L. Kara
    G. İpekoğlu
    G. Çam
    Journal of Materials Engineering and Performance, 2016, 25 : 320 - 326
  • [12] Microstructure and Mechanical Properties of Refill Friction Stir Spot Welded 7475 Aluminum Alloy Joints
    Lu, Zhenyang
    Gong, Wentao
    Chen, Shujun
    Yuan, Tao
    Li, Xiaoxu
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2019, 48 (04): : 1267 - 1274
  • [13] Microstructure and Mechanical Properties of Refill Friction Stir Spot Welded 7475 Aluminum Alloy Joints
    Lu Zhenyang
    Gong Wentao
    Chen Shujun
    Yuan Tao
    Li Xiaoxu
    RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (04) : 1267 - 1274
  • [14] Microstructures and Mechanical Properties of Friction Stir Spot Welded Aluminum Alloy AA2014
    Babu, S.
    Sankar, V. S.
    Ram, G. D. Janaki
    Venkitakrishnan, P. V.
    Reddy, G. Madhusudhan
    Rao, K. Prasad
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (01) : 71 - 84
  • [15] Microstructures and Mechanical Properties of Friction Stir Spot Welded Aluminum Alloy AA2014
    S. Babu
    V. S. Sankar
    G. D. Janaki Ram
    P. V. Venkitakrishnan
    G. Madhusudhan Reddy
    K. Prasad Rao
    Journal of Materials Engineering and Performance, 2013, 22 : 71 - 84
  • [16] Microstructure and mechanical properties of friction spot welded 6061-T4 aluminum alloy
    Shen, Zhikang
    Yang, Xinqi
    Yang, Shuo
    Zhang, Zhaohua
    Yin, Yuhuan
    MATERIALS & DESIGN, 2014, 54 : 766 - 778
  • [17] Mechanical Properties and Microstructural Characteristics of Friction Welded Dissimilar Joints of Aluminium Alloys
    Bharathi, S. R. Sundara
    Rajeshkumar, R.
    Rose, A. Razal
    Balasubramanian, V.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 6755 - 6763
  • [18] Microstructure, mechanical and electrical properties of dissimilar friction stir welded 2024 aluminum alloy and copper joints
    Khajeh, Rasoul
    Jafarian, Hamid Reza
    Seyedein, Seyed Hossein
    Jabraeili, Reza
    Eivani, Ali Reza
    Park, Nokeun
    Kim, Yejin
    Heidarzadeh, Akbar
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 14 : 1945 - 1957
  • [19] Effect of friction stir welding tool profiles on mechanical properties of dissimilar welded aluminum alloy plates
    Nadikudi, Bhanodaya Kiran Babu
    INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY, 2021, 12 (04) : 562 - 568
  • [20] Mechanical Properties and Microstructural Characteristics of Friction Welded Dissimilar Joints of Aluminium Alloys
    S. R. Sundara Bharathi
    R. Rajeshkumar
    A. Razal Rose
    V. Balasubramanian
    Transactions of the Indian Institute of Metals, 2018, 71 : 91 - 97
12345