Surface modification of polyurethane film using atmospheric pressure plasma

被引：0

作者：

Yang, IY ^{[1
]}

Myung, SW ^{[1
]}

Choi, HS ^{[1
]}

Kim, IH ^{[1
]}

机构：

[1] Chungnam Natl Univ, Dept Chem Engn, Taejon 305764, South Korea

来源：

POLYMER-KOREA | 2005年 / 29卷 / 06期

关键词：

atmospheric pressure plasma; polyurethane film; surface free energy; DPPH method; peroxide;

D O I：

暂无

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Commercial polyurethane film (PU) was modified with Ar plasma ionized in dielectric barrier discharge (DBD) plate-type reactor under atmospheric pressure. We measured the change of the contact angle and the surface free energy with respect to the plasma treatment conditions such as treatment time, RF-power, and Ar gas flow rate. We also optimized the plasma treatment conditions to maximize the surface peroxide concentration. At the plasma treatment time of 70 sec, the power of 120 W and the Ar gas flow rate of 5 liter per minute (LPM), the best wettability and the highest surface free energy were obtained. The 1,1-diphenyl-2-picrylhydrazyl (DPPH) method confirmed that the surface peroxide concentration was about 2.1 nmol/cm(2) at 80 W, 30 sec, 6 LPM.

引用

页码：581 / 587

页数：7

共 50 条

[41] Plasma modification at atmospheric pressure
Kogoma, M
Prat, R
Suwa, T
Takeda, A
Okazaki, S
Inomata, T
PLASMA PROCESSING OF POLYMERS, 1997, 346 : 379 - 393
[42] Basic characteristics for PEN film surface modification using atmospheric-pressure non-equilibrium microwave plasma jet
Yuji, Toshifumi
Urayama, Takuya
Fujii, Shuitsu
Iijima, Yoshitoki
Suzaki, Yoshifumi
Akatsuka, Hiroshi
IEEJ Transactions on Fundamentals and Materials, 2008, 128 (06) : 449 - 455
[43] Modification of a-C:H film surface by atmospheric pressure plasma jet for liquid crystal alignment
Baitukha, Alibi
Mori, Shinsuke
Suzuki, Masaaki
THIN SOLID FILMS, 2012, 523 : 37 - 40
[44] Nanocapillary Atmospheric Pressure Plasma Jet: A Tool for Ultrafine Maskless Surface Modification at Atmospheric Pressure
Motrescu, Iuliana
Nagatsu, Masaaki
ACS APPLIED MATERIALS & INTERFACES, 2016, 8 (19) : 12528 - 12533
[45] Aluminium Thin Film Surface Modification via Low-Pressure and Atmospheric-Pressure Argon Plasma Exposure
Samad, M. I. A.
Nayan, N.
Bakar, A. S. A.
Wageh, A. H.
Hamzah, A. A.
Latif, R.
JOURNAL OF SURFACE INVESTIGATION, 2022, 16 (03): : 421 - 426
[46] Aluminium Thin Film Surface Modification via Low-Pressure and Atmospheric-Pressure Argon Plasma Exposure
M. I. A. Samad
N. Nayan
A. S. A. Bakar
A. H. Wageh
A. A. Hamzah
R. Latif
Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, 2022, 16 : 421 - 426
[47] Maskless Surface Modification of Polyurethane Films by an Atmospheric Pressure He/O2 Plasma Microjet for Gelatin Immobilization
Zhang, Man
Dai, Yichuan
Wen, Li
Wang, Hai
Chu, Jiaru
MICROMACHINES, 2018, 9 (04):
[48] Surface treatment using atmospheric pressure plasma
Kogoma, Masuhiro
Journal of the Vacuum Society of Japan, 2008, 51 (01) : 2 - 7
[49] Surface Modification of Polymeric Material Using Atmospheric Plasma
Sim, Dong Hyun
Seul, Soo Duk
POLYMER-KOREA, 2008, 32 (05) : 433 - 439
[50] Surface treatment using atmospheric pressure plasma
Department of Chemistry, Faculty of Science and Technology, Sophia University 7-1, Kioi-cho, Chiyoda-ku, Tokyo 102-8554, Japan
J.Vac. Soc.Japan, 2008, 1 (26-29):

← 1 2 3 4 5 →