ULTRASONIC RAYLEIGH WAVE INSPECTION OF WAVINESS IN WIND TURBINE BLADES: EXPERIMENTAL AND FINITE ELEMENT METHOD

被引：10

作者：

Chakrapani, Sunil Kishore ^{[1
]}

Dayal, Vinay ^{[1
]}

Barnard, Daniel J. ^{[1
]}

Eldal, Aaron ^{[1
]}

Krafka, Ryan ^{[1
]}

机构：

[1] Iowa State Univ, Ctr Nondestruct Evaluat, Ames, IA 50011 USA

来源：

REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 31A AND 31B | 2012年 / 1430卷

关键词：

Air-Coupled Ultrasound; Fiber Waviness; Thick Composites; Wind Turbine Blades;

D O I：

10.1063/1.4716444

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

This paper presents the investigation of discrete, out-of-plane waviness in thick composite plates with applications to wind turbine blades. The investigation was carried out with the help of air coupled ultrasonics and a two-step procedure was framed to assist production line implementation. The first step involved detection of marcels, and the second step involved the characterization of these marcels with the help of an index called aspect ratio. A set of standardized samples with known aspect ratios were fabricated and used for this study. Finite element models were created to understand the wave propagation in wavy composite plates. All the experimental data was correlated with numerical B-Scans and conclusions concerning the method were made.

引用

页码：1911 / 1917

页数：7

共 50 条

[31] Development of an anisotropic beam finite element for composite wind turbine blades in multibody system
Kim, Taeseong
Hansen, Anders M.
Branner, Kim
RENEWABLE ENERGY, 2013, 59 : 172 - 183
[32] FINITE ELEMENT MODELING OF A DUAL AXIS RESONANT TEST SYSTEM FOR WIND TURBINE BLADES
Desmond, Michael, Jr.
White, Darris
Barott, William
ES2009: PROCEEDINGS OF THE ASME 3RD INTERNATIONAL CONFERENCE ON ENERGY SUSTAINABILITY, VOL 2, 2009, : 951 - 960
[33] Finite element modeling optimization of wind turbine blades from an earthquake engineering perspective
Ali, Ahmer
De Risi, Raffaele
Sextos, Anastasios
ENGINEERING STRUCTURES, 2020, 222
[34] Probabilistic Characterization of Wind Turbine Blades via Aeroelasticity and Spinning Finite Element Formulation
Velazquez, Antonio
Swartz, R. Andrew
SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2012, PTS 1 AND 2, 2012, 8345
[35] Finite element analysis of composite T-joints used in wind turbine blades
Wang, Y.
Soutis, C.
Hajdaei, A.
Hogg, P. J.
PLASTICS RUBBER AND COMPOSITES, 2015, 44 (03) : 87 - 97
[36] EVALUATION OF SIMPLIFIED LOADING MODELS FOR FINITE ELEMENT ANALYSIS OF COMPOSITE WIND TURBINE BLADES
Barnes, Rosemary H.
Morozov, Evgeny, V
Shankar, Krishna
20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
[37] Finite Element Analysis of Composite Offshore Wind Turbine Blades Under Operating Conditions
Tarfaoui, M.
Nachtane, M.
Boudounit, H.
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2020, 12 (01)
[38] Turbine blades inspection using high frequency ultrasonic technique
Minachi, A
Panetta, PD
Nakahama, S
REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 20A AND 20B, 2001, 557 : 1634 - 1641
[39] Design of Foundations for Wind Turbine with Analysis by Finite Element Method
Zhussupbekov, Askar
Lukpanov, Rauan
Orazova, Dinara
Sapenova, Zhanbota
13TH BALTIC SEA REGION GEOTECHNICAL CONFERENCE - HISTORICAL EXPERIENCE AND CHALLENGES OF GEOTECHNICAL PROBLEMS IN BALTIC SEA REGION, 2016, : 196 - 200
[40] Assessing damage to wind turbine blades to support autonomous inspection
Gibson, Andy
Simandjuntak, Sarinova
Dunkason, Emily
Bingari, Hanly
Fraess-Ehrfeld, Alex
HYPERSPECTRAL IMAGING AND APPLICATIONS II, 2022, 12338

← 1 2 3 4 5 →