Effects of tool rotation and pin diameter on fatigue properties of friction stir welded lap joints

被引：53
|
作者：
Kulekci, Mustafa Kemal [1 ]
Sik, Aydin [2 ]
Kaluc, Erdinc [3 ]
机构：
[1] Mersin Univ, Fac Tarsus Tech Educ, TR-33480 Tarsus, Turkey
[2] Gazi Univ, Ind Arts Educ Fac, Ankara, Turkey
[3] Kocaeli Univ, Fac Engn, Dept Engn Mech, TR-41040 Izmit, Turkey
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2008年 / 36卷 / 9-10期
关键词：
friction welding; friction stir welding; lap joints; fatigue;
D O I：
10.1007/s00170-006-0901-z
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The objective of this study was to determine the effects of the tool pin diameter and tool rotation on the fatigue behaviour of friction stir welded (FSW) lap joints. FSW lap joints of AA 5754 aluminium alloy plates were produced by means of a conventional semiautomatic milling machine. Consequently, defect free FSW lap joints were produced on alloy plates at a constant traverse speed but with different tool pin diameter and tool rotation. Therefore, within this study, tool rotation and the tool pin diameter were accepted as variable parameters, while others held fixed. The results of the tests performed, indicate that an optimisation is required for the studied parameters, in order to obtain reasonable fatigue strength. An index, related to tool rotation, traverse speed, pin diameter, and pin height can be identified and used to select optimum parameters for FSW applications.
引用
收藏
页码：877 / 882
页数：6
相关论文
共 50 条
  • [21] Effect of tool pin profile on microstructure and mechanical properties of friction stir welded pure copper joints
    Khodaverdizadeh, H.
    Heidarzadeh, A.
    Saeid, T.
    MATERIALS & DESIGN, 2013, 45 : 265 - 270
  • [22] Effects of Tool Rotation Speed and Pin Geometry on Properties in Friction Stir Welding of Brass
    Barlas, Zafer
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2021, 24 (01): : 339 - 346
  • [23] Seam-Tracking for Friction Stir Welded Lap Joints
    Fleming, Paul A.
    Hendricks, Christopher E.
    Cook, George E.
    Wilkes, D. M.
    Strauss, Alvin M.
    Lammlein, David H.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (08) : 1128 - 1132
  • [24] Effects of pin diameter on microstructures and mechanical properties of friction stir spot welded AZ31B magnesium alloy joints
    Shen, J.
    Wang, D.
    Liu, K.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (05) : 357 - 363
  • [25] Seam-Tracking for Friction Stir Welded Lap Joints
    Paul A. Fleming
    Christopher E. Hendricks
    George E. Cook
    D. M. Wilkes
    Alvin M. Strauss
    David H. Lammlein
    Journal of Materials Engineering and Performance, 2010, 19 : 1128 - 1132
  • [26] Fatigue behaviour of Al2024-T3 friction stir welded lap joints
    Fersini, D.
    Pirondi, A.
    ENGINEERING FRACTURE MECHANICS, 2007, 74 (04) : 468 - 480
  • [27] Tensile and fatigue properties of friction stir AZ31B-H24 magnesium alloy welded joints under the influences of pin geometry and tool rotation rate
    Prihajatno, M.
    Ilman, M. N.
    Sriwijaya, R. A.
    Muslih, M. R.
    Apriansyah, R.
    JOURNAL OF ADVANCED JOINING PROCESSES, 2024, 9
  • [28] Effect of Tool Shoulder Diameter on Stir Zone Characteristics of Friction Stir Welded HSLA Steel Joints
    S. Ragu Nathan
    V. Balasubramanian
    S. Malarvizhi
    A. G. Rao
    Transactions of the Indian Institute of Metals, 2016, 69 : 1861 - 1869
  • [29] Effect of Tool Shoulder Diameter on Stir Zone Characteristics of Friction Stir Welded HSLA Steel Joints
    Nathan, S. Ragu
    Balasubramanian, V.
    Malarvizhi, S.
    Rao, A. G.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (10) : 1861 - 1869
  • [30] Fatigue properties of friction stir welded joints and their residual stress distributions - Studies on characteristics of friction stir welded joints in structural aluminum alloys
    Okubo, K.
    Kamioka, M.
    Namba, K.
    Welding International, 2008, 22 (02) : 63 - 72
12345