Surface-micromachined MEMS acoustic sensor with bottom electrode anchors

被引：1
|
作者：
Lee, J. [1 ]
Kim, H. J. [1 ]
Lee, S. Q. [1 ]
Lee, S. K. [1 ]
Ko, S. C. [1 ]
Park, K. H. [1 ]
机构：
[1] Elect & Telecommun Res Inst, IT Convergence & Component Lab, 161 Gajeong Dong, Taejon 305350, South Korea
来源：
ELECTRONICS LETTERS | 2008年 / 44卷 / 09期
关键词：
D O I：
10.1049/el:20080401
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A capacitive MEMS acoustic sensor with two sacrificial layers based on surface micromachining on a GaAs substrate is presented. This sensor has bottom electrode anchors fabricated using an initial sacrificial layer for the formation of a back chamber. The bottom anchors serve to eliminate the back side process of the wafer for a conventional back chamber because the chamber is implemented through substrate surface etching. The proposed circular-type microphone has a diameter of 1.0 mm and a gap height of 2 mu m. It shows a pull down voltage of 8.5 V and a total capacitance of 5.5 pF. Additionally, the MEMS microphone has a sensitivity of 0.09 mV/Pa at 1 kHz at a bias of 2 V.
引用
收藏
页码：576 / 577
页数：2
相关论文
共 50 条
  • [41] Surface-micromachined capacitive differential pressure sensor with lithographically defined silicon diaphragm
    Univ of Michigan, Ann Arbor, United States
    J Microelectromech Syst, 2 (98-105):
  • [42] Surface-micromachined capacitive differential pressure sensor with lithographically defined silicon diaphragm
    Mastrangelo, CH
    Zhang, X
    Tang, WC
    JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 1996, 5 (02) : 98 - 105
  • [43] Surface-micromachined CMOS process enhances IC tire-pressure sensor
    Electronic Design, 2002, 50 (17)
  • [44] Planar surface-micromachined pressure sensor with a sub-surface, embedded reference pressure cavity
    Eaton, WP
    Smith, JH
    MICROMACHINED DEVICES AND COMPONENTS II, 1996, 2882 : 259 - 265
  • [45] Surface-micromachined millimeter-wave antennas
    Yoon, YK
    Pan, B
    Papapolymerou, J
    Tentzeris, M
    Allen, MG
    TRANSDUCERS '05, DIGEST OF TECHNICAL PAPERS, VOLS 1 AND 2, 2005, : 1986 - 1989
  • [46] Integrated surface-micromachined mass flow controller
    Xie, J
    Shih, J
    Tai, YC
    MEMS-03: IEEE THE SIXTEENTH ANNUAL INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS, 2003, : 20 - 23
  • [47] Design and fabrication of surface-micromachined spherical mirrors
    Hou, MTK
    Liao, KM
    Yeh, HZ
    Hong, PY
    Chen, RS
    2002 IEEE/LEOS INTERNATIONAL CONFERENCE ON OPTICAL MEMS, CONFERENCE DIGEST, 2002, : 195 - 196
  • [48] Surface-micromachined confocal scanning optical microscope
    Piyawattanametha, W.
    Toshiyoshi, H.
    LaCosse, J.
    Wu, M.C.
    2000, IEEE, Piscataway
  • [49] Reducing defects in integrated surface-micromachined accelerometers
    Grosjean, DE
    MICRO, 2003, 21 (02): : 43 - +
  • [50] Surface-micromachined polysilicon MOEMS for adaptive optics
    Comtois, J
    Michalicek, A
    Cowan, W
    Butler, J
    SENSORS AND ACTUATORS A-PHYSICAL, 1999, 78 (01) : 54 - 62
12345