Anode-supported solid oxide fuel cells with multilayer LSC/CGO/LSC cathode

被引：11

作者：

Solovyev, A. A. ^{[1
,2
,3
]}

Kuterbekov, K. A. ^{[2
]}

Nurkenov, S. A. ^{[2
]}

Nygymanova, A. S. ^{[2
]}

Shipilova, A. V. ^{[1
]}

Smolyanskiy, E. A. ^{[1
,3
]}

Rabotkin, S. V. ^{[1
]}

Ionov, I. V. ^{[1
]}

机构：

[1] Inst High Current Elect, 2-3 Akadsky Ave, Tomsk 634055, Russia

[2] LN Gumilyov Eurasian Natl Univ, Nur Sultan, Kazakhstan

[3] Natl Res Tomsk Polytechn Univ, Tomsk, Russia

来源：

FUEL CELLS | 2021年 / 21卷 / 04期

基金：

俄罗斯基础研究基金会;

关键词：

electrode; magnetron sputtering; multilayer cathode; polarization resistance; solid oxide fuel cell (SOFC); thin film electrolyte; THIN-FILM ANODES; SCALE-UP; PERFORMANCE; SOFC; YSZ; ELECTRODES; GDC;

D O I：

10.1002/fuce.202000168

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

The multilayer La0.6Sr0.4CoO3/Ce0.9Gd0.1O2/La0.6Sr0.4CoO3 (LSC/CGO/LSC) thin film cathode of the solid oxide fuel cell (SOFC) with the different thickness of the LSC and CGO layers are obtained by magnetron sputtering. Cathodes are deposited onto the NiO/8YSZ anode-supported 8YSZ/CGO bilayer electrolyte. The influence of the deposited multilayer cathode on the SOFC performance is investigated in the temperature range between 800 and 600 degrees C. It is shown that the thin-film multilayer cathode allows increasing the SOFC efficiency, and the obtained optimum thickness of the LSC and CGO layers provides the maximum power density for SOFCs. The maximum power density of 2430, 1170, and 290 mW cm(-2) is obtained respectively at 800, 700, and 600 degrees C for the SOFCs with the LSC/CGO/LSC layer 50/50/50 nm thick. The polarization resistance measured at 800 and 750 degrees C on the symmetric SOFC with the CGO electrolyte and LSC/CGO/LSC cathode is 0.17 and 0.3 omega cm(2), respectively.

引用

页码：408 / 412

页数：5

共 50 条

[31] Preparation and Characteristics of High Performance Cathode for Anode-Supported Solid Oxide Fuel Cell
Song, Rak-Hyun
JOURNAL OF THE KOREAN ELECTROCHEMICAL SOCIETY, 2005, 8 (02): : 88 - 93
[32] Anode Current Collecting Efficiency of Tubular Anode-supported Solid Oxide Fuel Cells
Bai, Y.
Wang, C.
Jin, C.
Liu, J.
FUEL CELLS, 2011, 11 (03) : 465 - 468
[33] Effect of anode thickness on impedance response of anode-supported solid oxide fuel cells
Park, Young Min
Lee, Hoo Jung
Bae, Hong Yeol
Ahn, Jin Su
Kim, Haekyoung
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2012, 37 (05) : 4394 - 4400
[34] Comparison Between Anode-Supported and Electrolyte-Supported Ni-CGO-LSCF Micro-tubular Solid Oxide Fuel Cells
Droushiotis, N.
Dal Grande, F.
Othman, M. H. Dzarfan
Kanawka, K.
Doraswami, U.
Metcalfe, I. S.
Li, K.
Kelsall, G.
FUEL CELLS, 2014, 14 (02) : 200 - 211
[35] A study of multilayer tape casting method for anode-supported planar type solid oxide fuel cells (SOFCs)
Wang, Zhenrong
Qian, Jiqin
Cao, Hadi
Wang, Shaorong
Wen, Tinglian
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 437 (1-2) : 264 - 268
[36] Fabrication and evaluation of electrochemical characteristics of the composite cathode layers for the anode-supported solid-oxide fuel cells
Chang, Yang-Chuang
Lee, Maw-Chwain
Kao, Wei-Xin
Wang, Chun-Hsiu
Lin, Tai-Nan
Chang, Jen-Chen
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2011, 42 (05) : 775 - 782
[37] Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells
Leonide, A.
Sonn, V.
Weber, A.
Ivers-Tiffee, E.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2008, 155 (01) : B36 - B41
[38] Reduced-Temperature Firing of Anode-Supported Solid Oxide Fuel Cells
Gao, Zhan
Barnett, Scott A.
ELECTROCHEMICAL SYNTHESIS OF FUELS 2, 2013, 58 (02): : 231 - 242
[39] Effects of Reduced Firing Temperature on Anode-Supported Solid Oxide Fuel Cells
Gao, Zhan
Barnett, Scott A.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2014, 161 (05) : F600 - F604
[40] Performance of anode-supported single-chamber solid oxide fuel cells
Ai Gang
Lu Zhe
Wei Bo
Huang Xiqiang
Chen Kongfa
Su Wenhui
CHINESE JOURNAL OF CATALYSIS, 2006, 27 (10) : 885 - 889

← 1 2 3 4 5 →