Effect of the reinforced boron carbide particulate content of AA6061 alloy on formation of the passive film in seawater

被引：97
|
作者：
Katkar, V. A. [1 ]
Gunasekaran, G. [1 ]
Rao, A. G. [1 ]
Koli, P. M. [1 ]
机构：
[1] Naval Mat Res Lab, Thana 421506, India
来源：
CORROSION SCIENCE | 2011年 / 53卷 / 09期
关键词：
Metal matrix composites; EIS; Polarisation; SEM; AFM; Passive films; POINT-DEFECT MODEL; METAL-MATRIX COMPOSITES; ANODIC OXIDE-FILMS; CORROSION BEHAVIOR; PITTING BEHAVIOR; ELECTROCHEMICAL-BEHAVIOR; ELECTRONIC-PROPERTIES; AA2024/SICP COMPOSITES; PIT NUCLEATION; ALUMINUM;
D O I：
10.1016/j.corsci.2011.04.023
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of boron carbide (B4C) reinforcement on the corrosion of AA6061 alloy was studied by investigating passive films formed in seawater. The higher passive current and its potential-dependence for these composites indicated formation of porous passive film. Electrochemical impedance spectroscopy (EIS) graph suggests that the alloy surface is partly or totally active. The formed passive film is n-type semiconductor junction in nature. The difference between corrosion potential (E-corr) and potential at zero charge (RC) suggests that the chloride ions responsible for film breakdown exist within the passive film. A suitable mechanism is proposed for the passive film breakdown. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2700 / 2712
页数：13
相关论文
共 50 条
  • [21] Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting
    Selvam, J. David Raja
    Smart, D. S. Robinson
    Dinaharan, I.
    MATERIALS & DESIGN, 2013, 49 : 28 - 34
  • [22] Fabrication and characterization of novel nitinol particulate reinforced aluminium alloy metal matrix composites (NiTip/AA6061 MMCs)
    Chauhan, Abhishek
    Vates, Umesh Kumar
    Kanu, Nand Jee
    Gupta, Eva
    Singh, Gyanendra Kumar
    Sharma, Bhupendra Prakash
    Gorrepati, Srinivasa Rao
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 3027 - 3034
  • [23] Properties of AA6061 aluminum alloy reinforced with different intermetallics and ceramics particles
    da Costa, Cesar Edil
    de Aguiar, Luana
    Borras, Vicente Amigo
    ADVANCED POWDER TECHNOLOGY V, 2006, 530-531 : 255 - +
  • [24] The Effect of an Addition of Sc and Zr on the Precipitation Behavior of AA6061 Alloy
    Kwon, Eui Pyo
    Do Woo, Kee
    Kim, Sang Hyuk
    Kang, Duck Soo
    Lee, Kwang Jin
    Jeon, Jae Yeol
    METALS AND MATERIALS INTERNATIONAL, 2010, 16 (05) : 701 - 707
  • [25] An analysis on effect of multipass twist extrusion process of AA6061 alloy
    Iqbal, U. Mohammed
    Kumar, V. S. Senthil
    MATERIALS & DESIGN, 2013, 50 : 946 - 953
  • [26] Effect of cold rolling on the indentation deformation of AA6061 aluminum alloy
    Yang, FQ
    Du, WW
    Okazaki, K
    JOURNAL OF MATERIALS RESEARCH, 2005, 20 (05) : 1172 - 1179
  • [27] Effect of ultrasonic energy on the spot weldability of aluminum alloy AA6061
    Shah, Umair
    Liu, Xun
    MATERIALS & DESIGN, 2020, 192
  • [28] The effect of an addition of Sc and Zr on the precipitation behavior of AA6061 alloy
    Eui Pyo Kwon
    Kee Do Woo
    Sang Hyuk Kim
    Duck Soo Kang
    Kwang Jin Lee
    Jae Yeol Jeon
    Metals and Materials International, 2010, 16 : 701 - 707
  • [29] The Effect of Vacuum on the Mechanical Properties of Sand Cast AA6061 Alloy
    Subodh Daronde
    Abhaykumar Kuthe
    Shishir Keerti
    Rajesh Khatirkar
    Ashutosh Bagde
    Manish Kamble
    Sandeep Dahake
    Journal of Materials Engineering and Performance, 2022, 31 : 262 - 271
  • [30] The Effect of Vacuum on the Mechanical Properties of Sand Cast AA6061 Alloy
    Daronde, Subodh
    Kuthe, Abhaykumar
    Keerti, Shishir
    Khatirkar, Rajesh
    Bagde, Ashutosh
    Kamble, Manish
    Dahake, Sandeep
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (01) : 262 - 271
12345