An Analytical and Experimental Investigation of Average Laser Power and Angular Scanning Speed Effects on Laser Tube Bending Process

被引：2

作者：

Imhan, Khalil Ibraheem ^{[1
,3
]}

Baharudin, B. T. H. T. ^{[1
]}

Zakaria, Azmi ^{[2
]}

Ismail, Mohd Idris Shah B. ^{[1
]}

Alsabti, Nasser Mahdi Hadi ^{[3
]}

Ahmad, Ahmad Kamal ^{[4
]}

机构：

[1] Univ Putra Malaysia, Dept Mech & Mfg Engn, Fac Engn, Serdang 43400, Selangor Darul, Malaysia

[2] Univ Putra Malaysia, Fac Sci, Serdang 43400, Selangor Darul, Malaysia

[3] Minist Sci & Technol, Laser Res Ctr, Baghdad, Iraq

[4] Al Nahrain Univ, Fac Sci, Baghdad, Iraq

来源：

2016 THE 3RD INTERNATIONAL CONFERENCE ON MECHATRONICS AND MECHANICAL ENGINEERING (ICMME 2016) | 2017年 / 95卷

关键词：

MECHANISM;

D O I：

10.1051/matecconf/20179505008

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Laser tube bending is a new technique of laser material forming to produce a complex and accurate shape due to its flexibility and high controllability. Moreover, the defects during conventional tube forming such as thinning, wrinkling, spring back and ovalization can be avoided in laser tube bending process, because there is no external force used. In this paper an analytical investigation has been conducted to analyses the effects of average laser power and laser scanning speed on laser tube bending process, the analytical results have been verified experimentally. The model used in this study is in the same trend of the experiment. The results show that the bending angle increased with the increasing of average laser power and decreased with the increasing of angular scanning speed.

引用

页数：4

共 50 条

[11] A Simple Analytical Model of Laser Bending Process
Eideh, A.
Dixit, Uday S.
Echempati, Raghu
LASERS BASED MANUFACTURING, 2015, : 1 - 15
[12] Experimental investigation of edge effect and longitudinal distortion in laser bending process
Zahrani, Esmaeil Ghadiri
Marasi, Abdolali
OPTICS AND LASER TECHNOLOGY, 2013, 45 : 301 - 307
[13] Scanning Path Planning in Laser Bending of Tube Based on Curvature
Wang, X. Y.
Wang, J.
Wang, L. J.
Xu, W. J.
Guo, D. M.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 6 - +
[14] Finite element analysis of laser tube bending process
Hao, N
Li, L
APPLIED SURFACE SCIENCE, 2003, 208 : 437 - 441
[15] Study on influence of process parameters on laser tube bending
Shandong University, Jinan 250061, China
Zhongguo Jixie Gongcheng, 2006, SUPPL. (1-4):
[16] Computer simulation and experimental investigation of sheet metal bending using laser beam scanning
Hu, Z
Labudovic, M
Wang, H
Kovacevic, R
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (04): : 589 - 607
[17] Experimental and analytical power flow in beams using a scanning laser Doppler vibrometer
Blotter, JD
West, RL
SHOCK AND VIBRATION, 1996, 3 (05) : 325 - 336
[18] Experimental investigation, statistical modeling and optimization of laser bending process of perforated sheets
Safari, M.
Babaei, A. M.
Zamzami, B.
de Sousa, R. Alves
OPTICS AND LASER TECHNOLOGY, 2024, 175
[19] Scanning path planning for laser bending of straight tube into coil-shape tube
Wang, X. Y.
Luo, Y. H.
Wang, J.
Xu, W. J.
Guo, D. M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 69 (1-4): : 909 - 917
[20] Scanning path planning for laser bending of straight tube into coil-shape tube
X. Y. Wang
Y. H. Luo
J. Wang
W. J. Xu
D. M. Guo
The International Journal of Advanced Manufacturing Technology, 2013, 69 : 909 - 917

← 1 2 3 4 5 →