A Study of the Carbides in High-Speed Steel Rolls

被引：6
|
作者：
Luan Yikun [1 ]
Song Nannan [1 ]
Kang Xiuhong [1 ]
Li Dianzhong [1 ]
机构：
[1] Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, Shenyang 110016, Peoples R China
来源：
THERMEC 2009, PTS 1-4 | 2010年 / 638-642卷
关键词：
carbide; high-speed steel (HSS) roll; morphology; solidification rate; refinement; FRACTURE PROPERTIES; ALLOYING ELEMENTS; MICROSTRUCTURE; BEHAVIOR; MILL;
D O I：
10.4028/www.scientific.net/MSF.638-642.3356
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Carbides in HSS roll were studied systematically. The results showed that there were two kinds of carbides in HSS roll, 1(st) and 2(nd) carbides. 1(st) eutectic carbides included the chrysanthemum-like MC mainly consisting of V and the plate-like M(2)C rich in Mo. 2(nd) carbides were complex carbides, concentrating Fe, Cr, Mo and V elements. The morphology, distribution and alloy concentration of the 1(st) eutectic carbides were studied using OM, SEM and EDS. During heat treatment, evolution of the 1(st) eutectic carbides was analyzed. It was found that the MC carbides had no change in morphology, components and distribution, while the M(2)C carbides decomposed to M(6)C and MC. In order to improve the properties of HSS, a method of increasing solidification rate was defined to refine the eutectic carbides. After refinement, the eutectic carbides distributed both along the grain boundaries and inside the grains.
引用
收藏
页码：3356 / 3361
页数：6
相关论文
共 50 条
  • [31] THE STUDY OF CARBIDES IN LASER-SURFACE TREATED M2 HIGH-SPEED STEEL
    SHI, GQ
    DING, PD
    LIU, JL
    [J]. LASERS IN ENGINEERING, 1995, 4 (01) : 25 - 31
  • [32] CHARACTERISTICS OF HIGH-CARBON HIGH-SPEED STEEL ROLLS FOR HOT STRIP MILL
    SANO, Y
    HATTORI, T
    HAGA, M
    [J]. ISIJ INTERNATIONAL, 1992, 32 (11) : 1194 - 1201
  • [33] Refinement effect of NbC particle additions on the microstructure of high-speed steel rolls
    Li, Hao-nan
    Zhang, Bo-han
    Qiao, Gui-ying
    Yuan, Nai-bo
    Xiao, Fu-ren
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 1697 - 1711
  • [34] TEMPERED CARBIDES IN HIGH-SPEED STEELS
    IRANI, RS
    WRIGHT, CS
    WRONSKI, AS
    [J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 1982, 1 (07) : 318 - 320
  • [35] IDENTIFICATION OF CARBIDES IN HIGH-SPEED STEELS
    ELRAKAYBY, AM
    MILLS, B
    [J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 1986, 5 (03) : 332 - 334
  • [36] Carbides in cast high-speed steels
    [J]. Izv Akad Nauk SSSR Met, 3 (68-74):
  • [37] Effects of Niobium on Microstructure, Hardness and Wear Behavior for High-Speed Steel Rolls
    Li, Hao-Nan
    Han, Shi-Chao
    Zhang, Bo-Han
    Qiao, Gui-Ying
    Liu, Jie-Bing
    Xiao, Fu-Ren
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2023, 54 (08): : 3271 - 3285
  • [38] Effects of Niobium on Microstructure, Hardness and Wear Behavior for High-Speed Steel Rolls
    Hao-nan Li
    Shi-chao Han
    Bo-han Zhang
    Gui-ying Qiao
    Jie-bing Liu
    Fu-ren Xiao
    [J]. Metallurgical and Materials Transactions A, 2023, 54 : 3271 - 3285
  • [39] On the evolution of secondary hardening carbides in a high-speed steel characterised by APFIM and SANS
    Department of Physical Metallurgy and Materials Testing, Montanuniversität Leoben, Leoben
    A-8700, Austria
    不详
    不详
    [J]. Z Metallkd, 2007, 11 (1093-1103):
  • [40] SOLUBILITY OF CARBIDES AND RED HARDNESS OF TUNGSTEN-MOLYBDENUM HIGH-SPEED STEEL
    POPANDOPULO, AN
    NOVIKOVA, GY
    DANILENKO, EP
    [J]. METAL SCIENCE AND HEAT TREATMENT, 1979, 21 (9-10) : 788 - 791
12345