REDUCTION OF TURBINE BLADE TIP LEAKAGE LOSSES AND EXCITATION FORCES BY PASSIVE TIP INJECTION

被引：0

作者：

aus der Wiesche, Stefan ^{[1
]}

Passmann, Maximilian ^{[1
]}

Willinger, Reinhard ^{[2
]}

机构：

[1] Muenster Univ Appl Sci, Dept Mech Engn, D-48565 Steinfurt, Germany

[2] Vienna Univ Technol, Inst Energy Syst & Thermodynam, A-1060 Vienna, Austria

来源：

PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL 1 | 2016年

关键词：

FLOW;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The reduction of turbine blade-tip losses by means of passive tip injection was theoretically investigated. The analysis employed an analytical expression of the blade-tip discharge coefficient The resulting blade-tip excitation forces (i.e. Thomas-Alford forces) were explicitly evaluated for unshrouded turbines with and without passive tip injection. It was found, that the Thomas-Alford coefficient for cross force can substantially increase when the blade-tip gap was reduced. This observation can directly be explained on the basis of viscous flow effects through the gap, and it was in excellent agreement with available literature data. Due to passive tip injection, a slight decrease of the blade-tip excitation cross force was obtained. The potential of the reduction of the cross force due to passive tip injection was found to be comparable to the corresponding tip loss reduction.

引用

页数：9

共 50 条

[31] Reduction of turbine tip clearance losses at design and off-design incidences by non-uniform tip injection
Gao, Jie
Zheng, Qun
Liu, Yunning
Zhao, Zhan
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2014, 228 (08) : 889 - 902
[32] Thermal performance of blade tip and casing coolant injection on a turbine blade with cavity and winglet-cavity tip
Zhou, Zhihua
Chen, Shaowen
Li, Weihang
Wang, Songtao
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 130 : 585 - 602
[33] TURBINE BLADE TIP FILM COOLING WITH BLADE ROTATION PART I: TIP AND PRESSURE SIDE COOLANT INJECTION
Tamunobere, Onieluan
Acharya, Sumanta
ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 5B, 2015,
[34] Tip Leakage Flow and Loss of the Flat Tip with Partial Shroud in a Turbine Blade Cascade of Strong Reaction
Bong, Seon Woo
Lee, Sang Woo
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2023, 47 (07) : 367 - 377
[35] The effects of tip gap variation on transonic turbine blade tip leakage flow based on VLES approach
Wang, Tianyi
Xuan, Yimin
Han, Xingsi
AEROSPACE SCIENCE AND TECHNOLOGY, 2021, 111
[36] Numerical simulation of blade tip leakage flow in an axial flow turbine
Inaba, T
Yamamoto, A
Outa, E
FOURTH INTERNATIONAL SYMPOSIUM ON EXPERIMENTAL AND COMPUTATIONAL AEROTHERMODYNAMICS OF INTERNAL FLOWS, VOL I, PROCEEDINGS, 1999, : 262 - 273
[37] Numerical Study on the Leakage Flow Control of Cavity Tip in a Turbine Blade
Qin, Taojie
Cao, Zhanwei
Li, Dong
He, Yaling
Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2023, 44 (12): : 3354 - 3360
[38] Effects of low Reynolds number on turbine blade tip leakage flow
Sun, Hao
Xue, Zhiheng
Li, Jun
Feng, Zhenping
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2010, 44 (03): : 11 - 15
[39] Numerical Analysis of Effects of Turbine Blade Tip Shape on Secondary Losses
Sarath, R. S.
Kumar, R. Ajith
Prasad, B. V. S. S. S.
Srikrishnan, A. R.
FLUID MECHANICS AND FLUID POWER - CONTEMPORARY RESEARCH, 2017, : 871 - 879
[40] Numerical modeling of heat transfer and pressure losses for an uncooled gas turbine blade tip: Effect of tip clearance and tip geometry
El-Gabry, Lamyaa A.
PROCEEDINGS OF THE ASME TURBO EXPO 2007, VOL 4, PTS A AND B, 2007, : 1 - 9

← 1 2 3 4 5 →