Grey relational analysis for optimal process variables during turning on CNC lathe

被引：1
|
作者：
Gupta, Pankaj [1 ]
Singh, Bhagat [1 ]
Shrivastava, Yogesh [2 ]
机构：
[1] Jaypee Univ Engn & Technol, Guna, Madhya Pradesh, India
[2] Galgotias Coll Engn & Technol, Greater Noida, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2022年 / 51卷
关键词：
Stability analysis; WDLMD; Grey relational analysis; Metal removal rate; CHATTER;
D O I：
10.1016/j.matpr.2021.05.259
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present research, a methodology has been proposed to enhance productivity at minimal chatter during turning operation on CNC lathe. Vibration signals acquired experimentally using a microphone are processed using merged Wavelet Denoising and Local Mean Decomposition (WDLMD) technique to decompose it into a series of product functions (PFs). Among these product functions the most prominent ones revealing chatter information are selected. Finally, Grey relational analysis (GRA) prediction method has been used to ascertain stable range of turning parameters pertaining to higher metal removal rate. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the 1st International Conference on Computations in Materials and Applied Engineering - 2021.
引用
收藏
页码：228 / 233
页数：6
相关论文
共 50 条
  • [11] Integrated roughing, finishing and chamfering turning process of toroidal worm manufacture on a general CNC lathe
    Ding, Shuang
    Zhang, Hu
    Guo, Erkuo
    Wu, Weiwei
    Zhang, Yifu
    Song, Aiping
    JOURNAL OF MANUFACTURING PROCESSES, 2021, 70 : 341 - 349
  • [12] Optimization of Multiple Responses in Dry Turning Process Using Taguchi-Grey Relational Analysis
    Verma, Sumit
    Singh, Hari
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 620 - 624
  • [13] Multi Objective Optimization of Turning Process using Grey Relational Analysis and Simulated Annealing Algorithm
    Kolahan, Farhad
    Golmezerji, Reza
    Moghaddam, Masoud Azadi
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 2926 - 2932
  • [14] Optimization of the red mud-aluminum composite in the turning process by the Grey relational analysis with entropy
    Rajesh, S.
    Rajakarunakaran, S.
    Sudhkarapandian, R.
    JOURNAL OF COMPOSITE MATERIALS, 2014, 48 (17) : 2097 - 2105
  • [15] Optimization of Lathe Cutting Parameters Using Taguchi Method and Grey Relational Analysis
    Jian, Bo-Lin
    Wang, Cheng-Chi
    Yau, Her-Terng
    Wu, Li-Wei
    Tian, An-Hong
    SENSORS AND MATERIALS, 2020, 32 (03) : 843 - 858
  • [16] Comparative Analysis Between LMD and WDLMD for Identifying Suitability in Measuring Chatter Features During Turning Operation on CNC Lathe
    Gupta, Pankaj
    Kumar, Sunil
    Shrivastava, Yogesh
    MAPAN-JOURNAL OF METROLOGY SOCIETY OF INDIA, 2025,
  • [17] Empirical Modeling of Turning Parameters Using Grey Relational Analysis
    Abhang, L. B.
    Hameedullah, M.
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 2596 - 2603
  • [18] Determination of the minute range for RSM to select the optimum cutting conditions during turning on CNC lathe
    Hyun Wook Lee
    Won Tae Kwon
    Journal of Mechanical Science and Technology, 2010, 24 : 1637 - 1645
  • [19] Determination of the minute range for RSM to select the optimum cutting conditions during turning on CNC lathe
    Lee, Hyun Wook
    Kwon, Won Tae
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (08) : 1637 - 1645
  • [20] Optimization of Multiple Performance Characteristics for CNC Turning of Inconel 718 Using Taguchi-Grey Relational Approach and Analysis of Variance
    Zhujani, Fatlume
    Abdullahu, Fitore
    Todorov, Georgi
    Kamberov, Konstantin
    METALS, 2024, 14 (02)
12345