Analysis of acting forces on rollers under the billet caster mould in the zone of secondary cooling

被引：0
|
作者：
Androsenko, Mariya [1 ]
Reshetnikova, Elena [1 ]
Tyuteryakov, Nail [1 ]
机构：
[1] Nosov Magnitogorsk State Tech Univ, Lenin Ave 38, Magnitogorsk 455000, Russia
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷
关键词：
Quality of production; Continuously cast preparation; Unit of the continuous molding of preparation; Geometrical and physical parameters;
D O I：
10.1016/j.matpr.2019.08.098
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Performance of secondary cooling zone rollers manufactured by "VAI FUCHS" and installed on the mould have been examined to determine such factors as the influence of the design of the mold foot rollers on the parameters of the billet. Calculations confirming the feasibility of the proposed solution have been made. The values of the bending moments and shear forces of the three-roller assembly are lower and fluctuate within 10%, which, if used, can reduce the likelihood of ingot bleeding and, consequently, can lead to an increase in the performance of the continuous casting machine. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2458 / 2461
页数：4
相关论文
共 50 条
  • [31] Analysis of Mould, Spray and Radiation Zones of Continuous Billet Caster by Three-dimensional Mathematical Model based on a Turbulent Fluid Flow
    Shamsi, M. R. R. I.
    Ajmani, S. K.
    STEEL RESEARCH INTERNATIONAL, 2010, 81 (02) : 132 - 141
  • [32] HEAT-EXCHANGE IN SECONDARY COOLING ZONE IN CURVED-MOULD CONTINUOUS-CASTING MACHINES
    SAMOILOVICH, YA
    KOLPAKOV, SV
    KABAKOV, ZK
    EMELYANOV, VA
    ERMAKOV, ON
    STEEL IN THE USSR, 1980, 10 (03): : 134 - 135
  • [33] PRECIPITATION OF FINE CARBONITRIDE AND HIGH-TEMPERATURE EMBRITTLEMENT OF LOW-CARBON STEEL DURING COOLING IN SECONDARY COOLING ZONE OF CONTINUOUS CASTER
    SUZUKI, K
    MIYAGAWA, S
    SAITO, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1993, 79 (11): : 1266 - 1272
  • [34] Height of Water Pool in the Roll Nip of Secondary Cooling Zone in Continuous Slab Caster: Application of Open Channel Hydraulics
    Somayeh Khani
    Heinz Palkowski
    Klaus Schwerdtfeger
    Metallurgical and Materials Transactions B, 2021, 52 : 3805 - 3814
  • [35] Height of Water Pool in the Roll Nip of Secondary Cooling Zone in Continuous Slab Caster: Application of Open Channel Hydraulics
    Khani, Somayeh
    Palkowski, Heinz
    Schwerdtfeger, Klaus
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2021, 52 (06): : 3805 - 3814
  • [36] HEAT-EXCHANGE BETWEEN STRANDS AND GUIDE ROLLERS IN THE SECONDARY COOLING ZONE OF A SLAB CONTINUOUS-CASTING MACHINE
    DIENER, A
    DRASTIK, A
    ARCHIV FUR DAS EISENHUTTENWESEN, 1982, 53 (01): : 13 - 19
  • [37] Analysis and optimization on secondary cooling system of ROKOP billet concaster at Chuanwei Iron and Steel Plant
    Chen, Dengfu
    Sun, Haifeng
    Feng, Ke
    Xu, Chushao
    Wang, Sizhong
    Wu, Wendong
    Yu, Xingyuan
    Huang, Shunzhong
    Huang, Zhongqing
    He, Yunshun
    Teshugang/Special Steel, 2002, 23 (02):
  • [38] ANALYSIS OF ROLL REACTION FORCES IN STRAIGHTENING ZONE OF COMBINATION LARGE-SECTION TWIN-STRAND BLOOM/SLAB CASTER.
    Mihara, Norio
    Kitamura, Haruo
    Horie, Takashi
    Kanei, Akira
    Nagata, Takuo
    Sasamoto, Yasuo
    Okazaki, Miyoji
    1600,
  • [39] VISCOELASTIC-PLASTIC ANALYSIS OF BROADENING OF SLAB IN THE SECONDARY COOLING ZONE OF CONTINUOUS CASTING
    Fu Jianxun
    Li Jingshe
    Zhang Hui
    ACTA METALLURGICA SINICA, 2010, 46 (01) : 91 - 96
  • [40] Analysis of Phenomenon of Plasticity Loss of Steel Core Made by Selective Laser Melting Method in Zone of Pressure Mould Conformal Cooling Channel
    Pieklo, Jaroslaw
    Garbacz-Klempka, Aldona
    MATERIALS, 2023, 16 (12)
12345