Analysis of acting forces on rollers under the billet caster mould in the zone of secondary cooling

被引：0
|
作者：
Androsenko, Mariya [1 ]
Reshetnikova, Elena [1 ]
Tyuteryakov, Nail [1 ]
机构：
[1] Nosov Magnitogorsk State Tech Univ, Lenin Ave 38, Magnitogorsk 455000, Russia
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷
关键词：
Quality of production; Continuously cast preparation; Unit of the continuous molding of preparation; Geometrical and physical parameters;
D O I：
10.1016/j.matpr.2019.08.098
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Performance of secondary cooling zone rollers manufactured by "VAI FUCHS" and installed on the mould have been examined to determine such factors as the influence of the design of the mold foot rollers on the parameters of the billet. Calculations confirming the feasibility of the proposed solution have been made. The values of the bending moments and shear forces of the three-roller assembly are lower and fluctuate within 10%, which, if used, can reduce the likelihood of ingot bleeding and, consequently, can lead to an increase in the performance of the continuous casting machine. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2458 / 2461
页数：4
相关论文
共 50 条
  • [1] An optimization procedure for the secondary cooling zone of a continuous billet caster
    van der Spuy, DD
    Craig, IK
    Pistorius, PC
    JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY, 1999, 99 (01): : 49 - 54
  • [2] USE OF ELECTROMAGNETIC STIRRERS IN THE SECONDARY COOLING ZONE OF A CONTINUOUS BILLET CASTER
    FORSTER, E
    RUDOLPH, G
    STERCKEN, K
    STAHL UND EISEN, 1982, 102 (25-2): : 1277 - 1284
  • [3] Use of Electromagnetic Stirrers in the Secondary Cooling Zone of a Continuous Billet Caster.
    Foerster, Eckehard
    Rudolph, Guenter
    Stercken, Karl
    Stahl und Eisen, 1982, 102 (25-26): : 1277 - 1284
  • [4] Improvement in billets quality from billet caster by roller suspension of secondary cooling zone stiffening
    Androsenko, Mariya
    Kulikova, Ekaterina
    Osipova, Olga
    INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2018), 2018, 224
  • [5] Assessment of the Stress–Strain State of the Strand and Caster Near the Foot Rollers in the Secondary-Cooling Zone
    M. V. Androsenko
    Metallurgist, 2019, 63 : 350 - 355
  • [6] Assessment of the Stress-Strain State of the Strand and Caster Near the Foot Rollers in the Secondary-Cooling Zone
    Androsenko, M. V.
    METALLURGIST, 2019, 63 (3-4) : 350 - 355
  • [7] Dynamic model for secondary cooling zone of slab caster
    College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
    Guocheng Gongcheng Xuebao, 2006, SPPL. 1 (87-90):
  • [8] Optimization of Secondary Cooling Water Distribution for Improving the Billet Quality for a Small Caster
    Ma, Jiaocheng
    Wang, Biao
    Zhang, Da
    Song, Wanli
    ISIJ INTERNATIONAL, 2018, 58 (05) : 915 - 920
  • [9] Research and Application of Dynamic Secondary Cooling Control System for a Continuous Steel Billet Caster
    Peng, Zun
    Hu, Wenhao
    Bao, Yanping
    Wang, Min
    Zhang, Liqiang
    Zhang, Chaojie
    ADVANCES IN ROLLING EQUIPMENT AND TECHNOLOGIES II, 2012, 572 : 404 - +
  • [10] Effect of Nozzle Parameters on the Cooling Conditions in the Secondary Cooling Zone of a Slab Caster
    Taferner, Matthias
    Laschinger, Julian
    Bernhard, Christian
    Bernhard, Michael
    Ilie, Sergiu
    BHM Berg- und Huttenmannische Monatshefte, 2023, 168 (11): : 536 - 542
12345