MICROSTRUCTURAL CHARACTERIZATION AND WEAR BEHAVIOR OF WC-CoCr COATING ON AZ91 MAGNESIUM ALLOY

被引：0

作者：

Buchtik, Martin ^{[1
]}

Masilko, Jiri ^{[1
]}

Vyklicky, Ondrej ^{[2
]}

Filipensky, Jan ^{[2
]}

Wasserbauer, Jaromir ^{[1
]}

Ptacek, Petr ^{[1
]}

机构：

[1] Brno Univ Technol, Fac Chem, Mat Res Ctr, Brno, Czech Republic

[2] Plasmamet Spol Sro, Brno, Czech Republic

来源：

28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019) | 2019年

关键词：

WC-CoCr; HVOF; AZ91; alloy; microstructure; wear; HVOF;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper includes the microstructural and wear characterization of WC-10Co4Cr coating on AZ91 magnesium alloy. Using the scanning electron microscopy and X-ray diffraction analysis it was determined that the microstructure was formed by WC particles, CoCr matrix, present Co3W3C mixed carbide, W2C, and free carbon. The presence of W2C and free carbon indicates the partial decarburization during the spraying process. The microhardness of HVOF-sprayed coating was 1480 +/- 80 HV 0.05, which is approximately 20x higher when compared to AZ91 alloy. The friction coefficient values with the subsequent weight loss of the coating and magnesium substrate were determined. It has been proven that HVOF-sprayed WC-CoCr coating can protect the magnesium substrate from the wear.

引用

页码：922 / 927

页数：6

共 50 条

[41] Anisotropy in Nanoscale Friction and Wear of Precipitate Containing AZ91 Magnesium Alloy
Kumar, Deepak
Jain, Jayant
Gosvami, Nitya Nand
TRIBOLOGY LETTERS, 2019, 67 (02)
[42] DENDRITIC SOLIDIFICATION OF MAGNESIUM ALLOY AZ91
PETTERSEN, K
JOURNAL OF METALS, 1988, 40 (07): : A15 - A15
[43] Effect of mechanical vibrations on the wear behavior of AZ91 Mg alloy
Chaturvedi, V.
Pandel, U.
Sharma, A.
INTERNATIONAL CONFERENCE ON ADVANCES IN METALLURGY, MATERIALS AND MANUFACTURING, 2018, 314
[44] Anisotropy in Nanoscale Friction and Wear of Precipitate Containing AZ91 Magnesium Alloy
Deepak Kumar
Jayant Jain
Nitya Nand Gosvami
Tribology Letters, 2019, 67
[45] Stress relaxation in an AZ91 magnesium alloy
Trojanová, Z
Lukác, P
Gabor, P
Drozd, Z
Máthis, K
KOVOVE MATERIALY-METALLIC MATERIALS, 2001, 39 (06): : 368 - 378
[46] Seffated flow in magnesium alloy AZ91
Corby, C
Cáceres, CH
Lukac, P
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 : 22 - 24
[47] Surface modification of AZ91 magnesium alloy
Luan, Benli
Gray, Joy
Yang, Lianxi
Cheong, Woo-Jae
Shoesmith, David
2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM, 2007, 546-549 : 513 - +
[48] Fabrication of AZ91 magnesium alloy foam
School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110023, China
不详
Zhuzao, 2007, 3 (242-244):
[49] Optimization of Wear Behavior of Magnesium Alloy AZ91 Hybrid Composites Using Taguchi Experimental Design
B. M. Girish
B. M. Satish
Sadanand Sarapure
Metallurgical and Materials Transactions A, 2016, 47 : 3193 - 3200
[50] Influencing Factors of Phytic Acid Conversion Coating on AZ91 Magnesium Alloy
Lu, Yanling
Chen, Yankun
Du, Shiguo
Guo, Yi
Hong, Qing
ADVANCED MATERIALS, PTS 1-4, 2011, 239-242 : 2336 - 2341

← 1 2 3 4 5 →