Wear mechanisms of MCrAlY abradable plasma-sprayed coatings

被引：0
|
作者：
Li, S [1 ]
Langlade-Bomba, C [1 ]
Treheux, D [1 ]
Crabos, F [1 ]
Monge-Cadet, P [1 ]
机构：
[1] Ecole Cent Lyon, UMR 5621, MMP, Ecully, France
来源：
THERMAL SPRAY, VOLS 1 AND 2: MEETING THE CHALLENGES OF THE 21ST CENTURY | 1998年
关键词：
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Reduction of operating clearance between the HP turbine and the shroud in the new generation of gas turbines is one way often used by engine manufacturers to improve efficiency. This implies developing a blade tip coating/shroud coating system to minimize the degradation (particularly blades wear) during eventual rubbing. In this study, the chosen systems are : VPS NiCoCrAIYTa as HP blade tip coating, Plasma-sprayed MCrAlY coatings deposited under various atmosphere as abradable coatings. In order to understand the wear mechanisms of these systems tribological tests (block on ring and fretting) were performed to study the influence of the coating microstructure on the wear mechanisms. The results were compared and correlated to those of rub tests performed with real engine components.
引用
收藏
页码：293 / 298
页数：6
相关论文
共 50 条
  • [41] The microstructural dependence of wear and indentation behaviour of some plasma-sprayed alumina coatings
    Hawthorne, HM
    Erickson, LC
    Ross, D
    Tai, H
    Troczynski, T
    WEAR, 1997, 203 : 709 - 714
  • [42] The damage mechanisms of several plasma-sprayed ceramic coatings in controlled scratching
    Xie, Y
    Hawthorne, HM
    WEAR, 1999, 233 : 293 - 305
  • [43] The microstructural dependence of wear and indentation behaviour of some plasma-sprayed alumina coatings
    Hawthorne, H.M.
    Erickson, L.C.
    Ross, D.
    Tai, H.
    Troczynski, T.
    Wear, 1997, 203-204 : 709 - 714
  • [44] MICROSTRUCTURE, WEAR-RESISTANCE AND EROSION RESISTANCE OF PLASMA-SPRAYED BORIDE COATINGS
    FORMANEK, B
    SWADZBA, L
    MACIEJNY, A
    SURFACE & COATINGS TECHNOLOGY, 1993, 56 (03): : 225 - 231
  • [45] Dry sliding wear behavior of plasma-sprayed aluminum hybrid composite coatings
    Manchang Gui
    Suk Bong Kang
    Metallurgical and Materials Transactions A, 2001, 32 : 2383 - 2392
  • [46] Structure and Wear Resistance of Plasma-Sprayed NiCrBSiC–TiCrC Composite Powder Coatings
    O.P. Umanskyi
    M.S. Storozhenko
    G.A. Baglyuk
    O.V. Melnyk
    V.P. Brazhevsky
    O.O. Chernyshov
    O.E. Terentiev
    Yu.V. Gubin
    O.D. Kostenko
    I.S. Martsenyuk
    Powder Metallurgy and Metal Ceramics, 2020, 59 : 434 - 444
  • [47] LASER PROCESSING OF PLASMA-SPRAYED COATINGS
    CAPP, ML
    RIGSBEE, JM
    MATERIALS SCIENCE AND ENGINEERING, 1984, 62 (01): : 49 - 56
  • [48] Investigation of plasma-sprayed dysprosia coatings
    Koththavasal, R.Venkatachari, 2023, (72):
  • [49] TEMPERATURE DISTRIBUTION IN PLASMA-SPRAYED COATINGS
    PAWLOWSKI, L
    THIN SOLID FILMS, 1981, 81 (01) : 79 - 88
  • [50] Plasma-sprayed strontium zirconate coatings
    Tugrul, A. Beril
    Toplan, H. Ozkan
    Buyuk, Bulent
    Demir, Ertugrul
    Sonmez, Goksun
    Kurt, Serhat
    Toplan, Nil
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2021, 127 (08):
12345