Inspection of Cracks in the Piston Rod of a Hydraulic Cylinder Using Injected Alternating Current-Field Measurement

被引：2
|
作者：
Zhang, Jikai [1 ]
Huang, Yuewen [1 ]
Tang, Jian [2 ]
Zhou, Fangfang [1 ]
Kang, Yihua [2 ]
Feng, Bo [2 ]
机构：
[1] Changjiang River Sci Res Inst, Natl Ctr Dam Safety Engn Technol Res, Wuhan 430010, Peoples R China
[2] Huazhong Univ Sci & Technol, Sch Mech Sci & Engn, Wuhan 430074, Peoples R China
来源：
WATER | 2022年 / 14卷 / 17期
基金：
中国国家自然科学基金;
关键词：
injected alternating current field measurement; nondestructive testing; piston rod; gate hoist; EDDY-CURRENT; METAL PLATES; MAGNETIZATION;
D O I：
10.3390/w14172736
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
This paper proposes a method of injected alternating current-field measurement (IAC-FM) for detecting orthogonal cracks in the piston rod of a hydraulic cylinder in a gate hoist. Using this method, both longitudinal and transverse cracks can be detected at the same time. An alternating magnetic field is produced inside the steel rod by axially injecting an alternating current into the rod. The longitudinal crack perturbs the circumferential magnetic field, whereas the transverse crack perturbs the current in the axial direction. Analyses of the behaviors of the magnetic field in the vicinity of the cracks were proposed, using a three-dimensional finite element software. An experimental setup was built and validation experiments were performed. The effects of the operating frequency and scan path were also studied. The results verified the feasibility of the IAC-FM method and showed great potential for the inspection of in-service hydraulic cylinders of gate hoists.
引用
收藏
页数：9
相关论文
共 49 条
  • [21] Development of a Velocity-Adaptable Alternating Current Field Measurement Device for Crack Inspection in Rails
    Ge, Jiuhao
    Chen, Xuanang
    Hu, Baowang
    IEEE SENSORS JOURNAL, 2023, 23 (15) : 17034 - 17041
  • [22] Research on in-service detection for axial cracks on drill pipe using the feed-through alternating current field measurement
    Li, Wei
    Yuan, Xinan
    Chen, Guoming
    Ge, Jiuhao
    Jiang, Yongsheng
    Jia, Tingliang
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2015, 51 (12): : 8 - 15
  • [23] A Novel TMR-Based Sensor in Injected Direct Current Field Measurement for Nonferrous Metal Inspection
    Zhang, Jikai
    Li, Donglin
    Kang, Yihua
    ELECTROMAGNETIC NONDESTRUCTIVE EVALUATION (XX), 2017, 42 : 11 - 18
  • [24] A novel transition frequency for identification and evaluation of subsurface cracks based on alternating current field measurement technique
    Zhao, Jianchao
    Li, Wei
    Yuan, Xinan
    Yin, Xiaokang
    Chen, Qinyu
    Zhao, Jianming
    Hu, Dong
    Wang, Yuncai
    MEASUREMENT, 2024, 231
  • [25] A Review of the Characterization of Rolling Contact Fatigue Cracks in Railway Rails Based on Alternating Current Field Measurement
    Shen J.
    Hou Y.
    Zhang C.
    Wang F.
    Liu M.
    Meng Z.
    Yin W.
    Zhongguo Tiedao Kexue/China Railway Science, 2024, 45 (02): : 15 - 29
  • [26] Novel semi-ring type alternating current field measurement probe for inspection of coiled tubing
    Yuan, Xin 'an
    Wang, Zhiren
    Li, Wei
    Yin, Xiaokang
    Bian, Xudong
    Zhao, Jianchao
    Zhao, Jianming
    Zhang, Zhan
    Wang, Wenbin
    MEASUREMENT, 2023, 223
  • [27] An integrated robotic system for automatic detection and characterisation of rolling contact fatigue cracks in rails using an alternating current field measurement sensor
    Rowshandel, Hamed
    Nicholson, Gemma L.
    Davis, Claire L.
    Roberts, Clive
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2013, 227 (04) : 310 - 321
  • [28] Applications using the alternating current field measurement (ACFM) technique, using rope access
    Raine, A
    Laenen, C
    INSIGHT, 2001, 43 (05) : 318 - 321
  • [29] Cost benefit applications using the alternating current field measurement testing technique
    Raine, A
    MATERIALS EVALUATION, 2002, 60 (01) : 49 - 52
  • [30] Detection and evaluation of rail surface defects using alternating current field measurement techniques
    Papaelias, Mayorkinos P.
    Lugg, Martin
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2012, 226 (F5) : 530 - 541
12345