Finite Element Analysis of Wind Vibration Control Effect for Single Transmission Tower

被引：0
|
作者：
Xie, Wenping [1 ]
Xia, Dongzhou [2 ]
Yang, Weijun [2 ]
机构：
[1] Guangdong Power Grid Corp, Elect Power Res Inst, Guangzhou 510080, Guangdong, Peoples R China
[2] Changsha Univ Sci & Technol, Sch Civil Engn & Architecture, Changsha 410014, Hunan, Peoples R China
来源：
APPLIED MECHANICS, MATERIALS AND MANUFACTURING IV | 2014年 / 670-671卷
关键词：
Transmission tower; Three-dimensional finite element analysis; vibration reduction rate; vibration control;
D O I：
10.4028/www.scientific.net/AMM.670-671.1116
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Three-dimensional finite element analysis model of transmission tower is established by using ANSYS software. According to the characteristics of the tower, wind vibration control effect of transmission tower is to be studied through seven different kinds of distribution of MR dampers condition, then get the dynamic response in different position of the tower body and tower top. The analysis results show that:: Through using of different damper layout, it can reduce vibration of the tower, especially the third scheme which is tower head lower half part edge member bar plus dampers had the most significant vibration reduction effect. Research results can be reference for engineering design and engineering practice, it also has a certain theoretical and practical significance.
引用
收藏
页码：1116 / 1120
页数：5
相关论文
共 50 条
  • [21] Tower Vibration Control of Active Stall Wind Turbines
    Spruce, Christopher J.
    Turner, Judith K.
    IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2013, 21 (04) : 1049 - 1066
  • [22] Finite element analysis and active vibration control of a cantilever beam
    Haralambous, MG
    Negvesky, D
    PROCEEDINGS IEEE SOUTHEASTCON '98: ENGINEERING FOR A NEW ERA, 1998, : 37 - 38
  • [23] Finite Element Analysis for the Collapse Accident of One 110kV Transmission Tower
    Jian, Mingjian
    Zhang, Duqing
    Zhang, Guangcheng
    MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 1940 - 1944
  • [24] Finite Element Analysis on the Ultimate Bearing Capacity of Welded Joints of Steel Transmission Tower
    Li, Wei-qing
    Zhou, Yi-yi
    Qi, Yong-sheng
    3RD INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING, ARCHITECTURE AND SUSTAINABLE INFRASTRUCTURE, ICCEASI 2015, 2015, : 643 - 647
  • [25] Finite element model of high-voltage transmission tower environmental sensitivity analysis
    School of Civil Engineering and Architecture, Northeast Dianli University, Jilin
    132012, China
    不详
    110015, China
    Yingyong Jichu yu Gongcheng Kexue Xuebao, 4 (805-814):
  • [26] Optimization of VEDs for Vibration Control of Transmission Line Tower
    Huang, Guoping
    Hu, Jianhua
    He, Yuzhu
    Liu, Haibo
    Sun, Xiugui
    ADVANCES IN CIVIL ENGINEERING, 2021, 2021
  • [27] Magnus Wind Turbine: Finite Element Analysis and Control System
    Demidova, Galina L.
    Anuchin, Alecksey
    Lukin, Aleksandr
    Lukichev, Dmitry
    Rassolkin, Anton
    Belahcen, Anouar
    2020 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, ELECTRICAL DRIVES, AUTOMATION AND MOTION (SPEEDAM 2020), 2020, : 59 - 64
  • [28] Analysis on Wind-induced Vibration Dynamic Responses of Transmission Tower-line System
    Hu Xiaoguang
    Yang Jingbo
    Yang Fengli
    ADVANCED RESEARCH ON MATERIALS, APPLIED MECHANICS AND DESIGN SCIENCE, 2013, 327 : 284 - 289
  • [29] Structural vibration analysis for wind turbine blades using finite element method
    Bao, Nengsheng
    Cao, Renjing
    Ye, Zhiquan
    Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2000, 21 (01): : 77 - 81
  • [30] Finite Element Simulation Calculation of Vibration Mode of Transmission Line Guide Ground and Elastic Boundary of Iron Tower
    Fu Chujun
    Liu Qi
    Wang Yilin
    Zhao Jianli
    Yan Baofeng
    2022 6TH INTERNATIONAL CONFERENCE ON POWER AND ENERGY ENGINEERING, ICPEE, 2022, : 368 - 373
12345