Evaluation of Fracture Toughness of Thermal Sprayed and Hard Chrome Coated Aluminium-Zinc Alloy

被引：6
|
作者：
Altuncu, E. [1 ]
Iric, S. [2 ]
机构：
[1] Sakarya Univ, Technol Fac, Met & Mat Engn Dept, Sakarya, Turkey
[2] Sakarya Univ, Engn Fac, Mech Engn Dept, Sakarya, Turkey
来源：
ACTA PHYSICA POLONICA A | 2017年 / 132卷 / 03期
关键词：
D O I：
10.12693/APhysPolA.132.926
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
The determination of fracture toughness of aluminium alloy aviation parts, exposed to cyclic mechanical loading, is an important engineering issue. The service life and crack resistance of such unprotected metallic parts is limited under corrosive operating conditions. The resistance against fracture cracking and corrosion resistance can be increased by the surface coatings. The scientific research of fracture toughness of coated metallic parts is being carried out in a comprehensive way. In this research, fracture toughness behaviour of high velocity oxy-fuel (HVOF) spray coated and conventional hard chrome plated aluminium-zinc alloy parts were compared and the results are discussed. The fracture surfaces are investigated and fracture toughness values are calculated. Electron microscopy analysis revealed significant differences in crack growth morphology and toughness values. As a result, the fracture toughness value is higher in hard chrome plated parts.
引用
收藏
页码：926 / 929
页数：4
相关论文
共 50 条
  • [21] Effect of notch root radius on fracture toughness of an 8090 aluminium - lithium alloy
    [J]. Kamat, S.V., 1600, (25):
  • [22] Evaluation of Fracture Toughness of Red Mud Reinforced Aluminium Matrix Composite
    Harshavardhan, R.
    Anil, K. C.
    Rao, K. V. Sreenivas
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 24854 - 24861
  • [23] Hydrogen embrittlement and fracture toughness of a titanium alloy with surface modification by hard coatings
    Lee, SC
    Ho, WY
    Huang, CC
    Meletis, EI
    Liu, Y
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1996, 5 (01) : 64 - 70
  • [24] EFFECT OF ARC-CURRENT AND PARTICLE MORPHOLOGY ON FRACTURE TOUGHNESS OF PLASMA SPRAYED ALUMINIUM OXIDE COATING
    Kar, Simanchal
    Bandyopadhyay, P. P.
    Paul, S.
    [J]. PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 1, 2017,
  • [25] Fracture Toughness of Plasma-Sprayed Thermal Barrier Ceramics: Influence of Processing, Microstructure, and Thermal Aging
    Dwivedi, Gopal
    Viswanathan, Vaishak
    Sampath, Sanjay
    Shyam, Amit
    Lara-Curzio, Edgar
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2014, 97 (09) : 2736 - 2744
  • [26] Evaluation of fracture toughness of VN hard coatings: Effect of preferred orientation
    Huang, Jia-Hong
    Wei, Liang-Ju
    Ting, I-Sheng
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 2022, 275
  • [27] Fracture toughness evaluation in particulate reinforced aluminum alloy composite
    Ahn, HK
    Kobayashi, T
    [J]. SCRIPTA MATERIALIA, 1997, 37 (12) : 1973 - 1978
  • [28] Fracture toughness of structural aluminium alloy thick plate joints by friction stir welding
    Mochizuki, M.
    Inuzuka, M.
    Nishida, H.
    Nakata, K.
    Toyoda, M.
    [J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2006, 11 (03) : 366 - 370
  • [29] Effect of mixed mode I/III loading on fracture toughness of 7010 aluminium alloy
    Raju, KSSE
    Mukhopadhyay, AK
    Kamat, SV
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2006, 22 (01) : 91 - 96
  • [30] Short particle strengthened aluminium alloy, fracture toughness investigated with instrumented impact tests
    Varga, T
    Schabl, G
    [J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 1999, 14 (2-4): : 183 - 198
12345