Dependence of thermo-mechanical and mechanical properties of novel fluorophosphate glass on various rare earth dopants

被引:7
|
作者
Choi, Ju H. [1 ]
Margaryan, Alfred [2 ]
Margaryan, Ashot [2 ]
Shi, Frank G. [1 ]
机构
[1] Univ Calif Irvine, Dept Chem Engn & Mat Sci, OptoElect Integrat & Packaging Lab, Irvine, CA 92697 USA
[2] AFO Res Inc, Glendale, CA 91209 USA
关键词
D O I
10.1007/s10853-007-2257-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The dependence of thermo-mechanical, and mechanical properties on various rare earth dopants (RE) including Nd2O3, Er2O3, and Yb2O3 in 0.4MgF(2)-0.4BaF(2)-0.1Ba(PO3)(2)-0.1Al(PO3)(3) glasses (MBBA system) is systematically investigated. MBBA system doped with RE dopants presented the potential application in the field of communication and high power layer system in the previous reports. In this work, it is found that the density of the doped glass increases with an increasing of RE concentration, which could be understood in terms of cationic field strength (CFS) effect. The Knoop hardness is found to decrease with the loading time and dopant concentration due to the indentation size effect (ISE) effect. The observed decrease of thermal expansion coefficient and the increase of glass transition temperature T-g with increasing dopant concentration are elucidated in terms of the increasing number of strong covalent bonds with increasing RE dopant concentration. Those results will be of paramount importance before designing optical devices.
引用
收藏
页码:1109 / 1113
页数:5
相关论文
共 50 条
  • [21] Influence of selected submicron inorganic particles on mechanical and thermo-mechanical properties of unsaturated polyester/glass composites
    Datta, Janusz
    Wloch, Marcin
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2014, 33 (10) : 935 - 941
  • [22] Composition dependence of thermo-dynamical and thermo-mechanical properties in SeTeSnGe chalcogenide glasses (ChGs)
    Pal, Shiv Kumar
    Mehta, Neeraj
    MacDonald, John C.
    Sharma, Dipti
    EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS, 2020, 90 (03):
  • [23] Grafting of various acrylic monomers on to natural rubber: Effects of glutaraldehyde curing on mechanical and thermo-mechanical properties
    Promsung, Rawiporn
    Nakaramontri, Yeampon
    Kummerloewe, Claudia
    Johns, Jobish
    Vennemann, Norbert
    Saetung, Nitinart
    Kalkornsurapranee, Ekwipoo
    MATERIALS TODAY COMMUNICATIONS, 2021, 27
  • [24] Grafting of various acrylic monomers on to natural rubber: Effects of glutaraldehyde curing on mechanical and thermo-mechanical properties
    Promsung, Rawiporn
    Nakaramontri, Yeampon
    Kummerlöwe, Claudia
    Johns, Jobish
    Vennemann, Norbert
    Saetung, Nitinart
    Kalkornsurapranee, Ekwipoo
    Materials Today Communications, 2021, 27
  • [25] Structural and Thermo-Mechanical Properties of Poly(ε-Caprolactone) Modified by Various Peroxide Initiators
    Przybysz, Marta
    Hejna, Aleksander
    Haponiuk, Jozef
    Formela, Krzysztof
    POLYMERS, 2019, 11 (07)
  • [26] Thermo-Mechanical Properties of Various Densities of Foamed Concrete Incorporating Polypropylene Fibres
    Jhatial, Ashfaque Ahmed
    Goh, Wan Inn
    Sohu, Samiullah
    Mohamad, Noridah
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (10) : 8171 - 8186
  • [27] Thermo-Mechanical Properties of Various Densities of Foamed Concrete Incorporating Polypropylene Fibres
    Ashfaque Ahmed Jhatial
    Wan Inn Goh
    Samiullah Sohu
    Noridah Mohamad
    Arabian Journal for Science and Engineering, 2020, 45 : 8171 - 8186
  • [28] Thermo-Mechanical and Delamination Properties in Drilling GFRP Composites by Various Drill Angles
    Khashaba, Usama A.
    Abd-Elwahed, Mohamed S.
    Eltaher, Mohamed A.
    Najjar, Ismail
    Melaibari, Ammar
    Ahmed, Khaled I.
    POLYMERS, 2021, 13 (11)
  • [29] INFLUENCE OF GRAPHENE NANOPLATELETS ON MECHANICAL AND THERMO-MECHANICAL PROPRTIES OF GLASS/EPOXY COMPOSITES
    Shabberhussain, S.
    Velmurugan, R.
    MATERIALI IN TEHNOLOGIJE, 2023, 57 (05): : 419 - 422
  • [30] TEM, XPS and thermo-mechanical properties of novel sustainable hybrid coatings
    Jena, Kishore K.
    Narayan, Ramanuj
    Raju, K. V. S. N.
    Rout, Tapan K.
    PROGRESS IN ORGANIC COATINGS, 2015, 78 : 140 - 145