A Novel Local Smoothing Method for Five-Axis Machining With Time-Synchronization Feedrate Scheduling

This paper presents an analytical continuous smoothing method for the five-axis toolpath by simultaneously scheduling the tool position and tool orientation trajectories. In order to ensure the high-order continuous, the peak-controlled jerk and arclength-parameterized property, a novel curve & x201C;airthoid & x201D; is proposed for the first time. The biairthoid is involved to smooth the corners of the tool position in the workpiece coordinate system (WCS) and the corners of the tool orientation in the machine coordinate system (MCS), the geometries of which are analytically determined by the user-defined deviation errors. A time synchronization strategy is proposed to extend the duration of the predetermined cubic acceleration profile to a specified time. With the kinematic constraints of the tool position and the tool orientation, the transitional and rotational trajectories are analytically synchronized by sharing the same motion time. To comply with the constraints of the linear feed drives, an optimization strategy is conducted by adjusting the kinematics of the tool position. By doing so, the approximation errors of the tool position and tool orientation in the WCS are strictly satisfied. The analytical arclength expression of the smoothing curves is more suitable for the on-line interpolation. Due to the arclength-parametrized transition curve, the feedrate fluctuation is eliminated. With the proposed time synchronization strategy, the physical limits of the feed drives are all respected. Moreover, the high-order continuous airthoid makes the motion more smoothing-going. Simulations and experiments verify the effectiveness of the proposed algorithm.