Mechanical and Energy Properties of Pellets Formed from Walnut Shells Blended with Spruce Sawdust

Various waste materials have energy potential. It is important to make use of this potential and prepare the product for further use by treating the waste. Treatments such as compressing waste into pellets leads to increasing the energy density of this fuel, which benefits transport and storage costs. However, low bulk density, high ash content, low-ash melting temperatures, and low calorific values of non-woody pellets can cause problems during their combustion. This article deals with the energy usage of walnut shells, which were blended with spruce sawdust in various amounts and compressed into pellets. The mechanical and energy properties of these were measured and compared with recommended or standardized values. The formed pellets met the quality limit for bulk density, ash content, moisture content, the content of nitrogen and sulfur, and net calorific value according to ISO 17225. However, low ash melting temperatures were noticed for pellets from pure walnut shells, and also lower mechanical durability for produced pellets with walnut shells contents higher than 10% were detected.