Cutting Material Influence on the Quality of the Machined Surface

被引：4
|
作者：
Moravcikova, Jana [1 ]
机构：
[1] Slovak Univ Technol, Mat Sci & Technol, Paulinska 16, Trnava 91724, Trnava, Slovakia
来源：
25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014 | 2015年 / 100卷
关键词：
Microstructure analysis; Quality of surface; Abraiding agents;
D O I：
10.1016/j.proeng.2015.01.375
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The aim of this paper is analyze of machined surface after grinding. A type of used abrasive significantly influences the machined surface quality. Studied was the influence of selected types of abrasives: 98A60K9V, 99BA60K9V, 49C60J9V on the integrity of the machined surface selected materials. Four different steels: C45, C55, 54SiCr6 and 50CrV4, were used for analyses in two states (after hardening and delivered state). These steels are used in production significantly. Surface quality evaluation is performed using a contact roughness measurement and microstructure analysis. The results of this experiments show that there are differences between different abrasive machined surfaces. (C) 2015 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：328 / 333
页数：6
相关论文
共 50 条
  • [41] Surface Roughness and Cutting Force of Inconel 718 Machined by Different Cutting Tools
    Geng, G. S.
    Xu, J. H.
    Fu, Y. C.
    Yang, B.
    [J]. SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 : 232 - +
  • [42] Enhancing machined parts surface quality by using a composite material for tool body in turning
    Shewakh, Walid Mahmoud
    [J]. MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 1853 - 1857
  • [43] THE INFLUENCE OF CUTTING PARAMETERS ON SURFACE QUALITY AND NITROGEN CONSUMPTION DURING LASER CUTTING
    Musil, Vaclav
    Sadilek, Marek
    Cep, Robert
    Malotova, Sarka
    [J]. MM SCIENCE JOURNAL, 2018, 2018 : 2363 - 2366
  • [44] The study of the influence of cutting conditions on machined surface roughness in turning hardened steels with cutting tools of cBN-based composite
    Stakhniv, N. E.
    [J]. JOURNAL OF SUPERHARD MATERIALS, 2013, 35 (03) : 166 - 174
  • [45] The study of the influence of cutting conditions on machined surface roughness in turning hardened steels with cutting tools of cBN-based composite
    N. E. Stakhniv
    [J]. Journal of Superhard Materials, 2013, 35 : 166 - 174
  • [46] Influence of dynamic processes on the machined surface
    Idrisova Y.V.
    Kudoyarov R.G.
    Fetsak S.I.
    Maslov A.R.
    [J]. Russian Engineering Research, 2015, 35 (12) : 887 - 891
  • [47] Using a DoE for a comprehensive analysis of the surface quality and cutting speed in WED-machined hadfield steel
    Mouralova, K.
    Benes, L.
    Bednar, J.
    Zahradnicek, R.
    Prokes, T.
    Matousek, R.
    Hrabec, P.
    Fiserova, Z.
    Otoupalik, J.
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (05) : 2371 - 2386
  • [48] Using a DoE for a comprehensive analysis of the surface quality and cutting speed in WED-machined hadfield steel
    K. Mouralova
    L. Benes
    J. Bednar
    R. Zahradnicek
    T. Prokes
    R. Matousek
    P. Hrabec
    Z. Fiserova
    J. Otoupalik
    [J]. Journal of Mechanical Science and Technology, 2019, 33 : 2371 - 2386
  • [49] Experimental Analysis of Effect of Machined Material on Cutting Forces during Drilling
    Sklenicka, Josef
    Hnatik, Jan
    Fulemova, Jaroslava
    Gombar, Miroslav
    Vagaska, Alena
    Jirasko, Aneta
    [J]. MATERIALS, 2024, 17 (11)
  • [50] Quantitative assessment of the causes of the strengthening of a machined surface after cutting
    Popov, Alexey
    Babak, Sergei
    [J]. INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2020, 14 (03) : 207 - 222
12345