Effects of tundish cover powder and teeming stream on oxidation rate of molten steel in tundish

被引：20
|
作者：
Sasai, K [1 ]
Mizukami, Y
机构：
[1] Nippon Steel Corp Ltd, Proc Technol Res Labs, Futtsu, Chiba 2938511, Japan
[2] Nippon Steel Corp Ltd, Nagoya R&D Labs, Nagoya, Aichi, Japan
来源：
ISIJ INTERNATIONAL | 1998年 / 38卷 / 04期
关键词：
continuous casting; tundish; secondary oxidation; tundish cover powder; teeming; oxidation rate; molten steel;
D O I：
10.2355/isijinternational.38.332
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The oxidation rate of the molten steel covered with the tundish cover powder and the molten steel being teemed was measured and the reaction mechanism was investigated as a basic study to quantify the oxidation rate of molten steel at different parts in an actual tundish. The oxidation rate of the molten steel covered with the tundish cover powder is proportional to the partial pressure of O-2 gas in the gaseous phase and the reciprocal number of thickness of tundish cover powder and can be explained by mass transfer control model of O-2 gas in the layer of tundish cover powder. The oxidation rate of stirred molten steel and molten steel being teemed is proportional to the partial pressure of O-2 gas in the gaseous phase and the 0.45th power of the stirring energy per unit area and can be rationally explained by a control model of mass transfer of O-2 gas in the gaseous phase in which an increase in the reaction interface area due to stirring is considered.
引用
收藏
页码：332 / 338
页数：7
相关论文
共 50 条
  • [41] ESTIMATION OF AIR OXIDATION OF TEEMING MOLTEN STEEL
    CHOH, T
    IWATA, K
    INOUYE, M
    [J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1983, 23 (07) : 598 - 607
  • [42] MODEL ANALYSIS OF TEMPERATURE VARIATION OF MOLTEN STEEL IN CONTINUOUS CASTING TUNDISH
    FUJII, T
    HABU, Y
    OOI, H
    [J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1971, 11 (05) : 357 - &
  • [43] Fluid Flow and Inclusion Motion in a Multi-Heat Teeming Tundish for Heavy Steel Ingot
    Jiao Li
    Guang-hua Wen
    Ping Tang
    Ming-mei Zhu
    Jian-jun Gao
    Hai-lan Liu
    [J]. Journal of Iron and Steel Research International, 2012, 19 : 19 - 26
  • [44] Research on temperature prediction model of molten steel of tundish in continuous casting
    Bowen Dong
    Wu Lv
    Zhi Xie
    [J]. Scientific Reports, 14 (1)
  • [45] Indirect measurement of molten steel level in tundish based on laser triangulation
    Su, Zhiqi
    He, Qing
    Xie, Zhi
    [J]. REVIEW OF SCIENTIFIC INSTRUMENTS, 2016, 87 (03):
  • [46] Inclusion separation from molten steel in tundish with rotating electromagnetic field
    Miki, Y
    Kitaoka, H
    Bessho, N
    Sakuraya, T
    Ogura, S
    Kuga, M
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1996, 82 (06): : 498 - 503
  • [47] REMOVAL OF INCLUSION FROM MOLTEN STEEL IN CONTINUOUS-CASTING TUNDISH
    BESSHO, N
    YAMASAKI, H
    FUJII, T
    NOZAKI, T
    HIWASA, S
    [J]. ISIJ INTERNATIONAL, 1992, 32 (01) : 157 - 163
  • [48] Modeling the Flow of Molten Steel in a Tundish Containing an Inclusion Filtering Trap
    Plappally, A. K.
    Sharif, M. A. R.
    Bradt, R. C.
    [J]. FDMP-FLUID DYNAMICS & MATERIALS PROCESSING, 2007, 3 (02): : 115 - 128
  • [49] EFFECT OF SLAG COVER ON HEAT-LOSS AND LIQUID STEEL FLOW IN LADLES BEFORE AND DURING TEEMING TO A CONTINUOUS-CASTING TUNDISH
    CHAKRABORTY, S
    SAHAI, Y
    [J]. METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1992, 23 (02): : 135 - 151
  • [50] Modeling the flow of molten steel in a tundish containing an inclusion filtering trap
    Plappally, A.K.
    Sharif, M.A.R.
    Bradt, R.C.
    [J]. Fluid Dynamics and Materials Processing, 2007, 3 (02): : 115 - 128
12345