Effect of Blend Ratio on Cure Characteristics, Tensile Properties, Thermal and Swelling Properties of Mica-Filled (Ethylene-Propylene-Diene Monomer)/(Recycled Ethylene-Propylene-Diene Monomer) (EPDM/r-EPDM) Blends

被引：9

作者：

Ismail, H. ^{[1
]}

Ishak, S. ^{[1
]}

Hamid, Z. A. A. ^{[1
]}

机构：

[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Nibong Tebal 14300, Penang, Malaysia

来源：

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY | 2015年 / 21卷 / 01期

关键词：

RUBBER; DEVULCANIZATION;

D O I：

10.1002/vnl.21369

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

(Ethylene-propylene-diene monomer)/(recycled ethylene-propylene-diene monomer) (EPDM/r-EPDM) blends filled with constant mica loading were compounded at various blends ratios (i.e., 90/10, 80/20, 70/30, 60/40, and 50/50). Results indicated that scorch time decreased with increasing r-EPDM content, whereas curing time, minimum torque, and maximum torque show the opposite trend. The tensile strength, stress at 100% elongation, and elongation at break value increased with increasing r-EPDM loading in the blend systems and the optimum properties occurred at 70/30 EPDM/r-EPDM blends ratio. The thermal stability of EPDM/r-EPDM blends increased with increasing r-EPDM content in the blends but the swelling percentage showed the opposite trend with a greater addition of r-EPDM content in the blends. (C) 2014 Society of Plastics Engineers

引用

页码：1 / 6

页数：6

共 50 条

[41] Improvement in Thermal Conductivity and Mechanical Properties of Ethylene-Propylene-Diene Monomer Rubber by Expanded Graphite
He, Shaojian
Lin, Yankai
Chen, Lin
Cao, Shanqiao
Lin, Jun
Du, Xiaoze
[J]. POLYMER COMPOSITES, 2017, 38 (05) : 870 - 876
[42] Effect of Formulation Variables on Cure Kinetics, Mechanical, and Electrical Properties of Filled Peroxide Cured, Ethylene-propylene-diene Monomer Compounds
Sengupta, Saurav
Esseghir, Mohamed
Cogen, Jeffrey M.
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 120 (04) : 2191 - 2200
[43] ELECTRICAL AND PHYSICAL-PROPERTIES OF ETHYLENE-PROPYLENE-DIENE MONOMER (EPDM) RUBBER LOADED WITH SEMI-REINFORCING FURNACE BLACK
YOUNAN, AF
CHONEIM, AM
TAWFIK, AAA
ABDELNOUR, KN
[J]. POLYMER DEGRADATION AND STABILITY, 1995, 49 (02) : 215 - 222
[44] Study on tensile, electrical, and thermal properties of aluminium particle filled natural rubber (NR) and ethylene-propylene-diene terpolymer (EPDM) composites
Anuar, J.
Mariatti, M.
Ismail, H.
[J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2007, 46 (10-12) : 1201 - 1206
[45] Evaluation of ethylene-propylene-diene monomer (EPDM) aging in UV/condensation environment by principal component analysis (PCA)
Zhao, Quanlin
Li, Xiaogang
Gao, Jin
Jia, Zhijun
[J]. MATERIALS LETTERS, 2009, 63 (20) : 1647 - 1649
[46] Effect of incorporation of conducting carbon black as filler on melt rheology and relaxation behaviour of ethylene-propylene-diene monomer (EPDM)
[J]. Ghosh, Premamoy, 1600, Elsevier Science Ltd, Exeter, United Kingdom (36):
[47] Curing characteristics, tear, fatigue, and aging properties of bentonite-filled ethylene-propylene-diene (EPDM) rubber composites
Ismail, Hanafi
Mat, Nurus Sakinah Che
Othman, Nadras
[J]. JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2018, 24 : E77 - E84
[48] Effect of Glut Palmitate (GP) Salt on the Properties of Sepiolite Filled Ethylene Propylene Diene Monomer (EPDM) Composites
Zaini, Nurul Aizan Mohd
Ismail, Hanafi
Rusli, Arjulizan
[J]. MATERIALS CHARACTERIZATION USING X-RAYS AND RELATED TECHNIQUES, 2019, 2068
[49] Effect of incorporation of conducting carbon black as filler on melt rheology and relaxation behaviour of ethylene-propylene-diene monomer (EPDM)
Ghosh, P
Chakrabarti, A
[J]. EUROPEAN POLYMER JOURNAL, 2000, 36 (03) : 607 - 617
[50] Effect of thermo-oxidation on the dynamical and physical properties of ethylene-propylene-diene monomer elastomer
Wang, Ya-jian
Yang, Yu-you
Wang, Lin-bing
[J]. JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 2021, 22 (07): : 499 - 513

← 1 2 3 4 5 →