MHD mixed convection in a lid-driven cavity with corner heater

被引：168
|
作者：
Oztop, Hakan F. [2 ,3 ]
A-Salem, Khaled [3 ]
Pop, Loan [1 ]
机构：
[1] Univ Cluj, Fac Math, Cluj Napoca, Romania
[2] King Saud Univ, Coll Engn, Dept Mech Engn, Riyadh, Saudi Arabia
[3] Firat Univ, Fac Technol, Dept Mech Engn, TR-23169 Elazig, Turkey
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2011年 / 54卷 / 15-16期
关键词：
Magnetohydrodynamics; Lid-driven cavity; Corner heater; TRANSVERSE MAGNETIC-FIELD; NATURAL-CONVECTION; SQUARE CAVITY; RECTANGULAR ENCLOSURE; NUMERICAL-SIMULATION; FLOW; GENERATION;
D O I：
10.1016/j.ijheatmasstransfer.2011.03.036
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Laminar mixed convection flow in the presence of magnetic field in a top sided lid-driven cavity heated by a corner heater was considered. The corner heater is under isothermal boundary conditions with different length in bottom and right vertical walls. Finite volume technique was used to solve governing equations. The temperature of the lid is lower than that of heater. The study is performed for different Grashof and Hartmann numbers at Re = 100. The obtained results showed some very interesting results. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码：3494 / 3504
页数：11
相关论文
共 50 条
  • [41] Analysis of MHD mixed convection in a flexible walled and nanofluids filled lid-driven cavity with volumetric heat generation
    Selimefendigil, Fatih
    Oztop, Hakan F.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, 118 : 113 - 124
  • [42] FINITE ELEMENT ANALYSIS OF MAGNETO-HYDRODYNAMIC (MHD) MIXED CONVECTION FLOW IN A LID-DRIVEN TRIANGULAR CAVITY
    Uddin, Mohammed Nasir
    Farhana, Aki
    Alim, Md. Abdul
    JOURNAL OF NAVAL ARCHITECTURE AND MARINE ENGINEERING, 2015, 12 (01): : 21 - 32
  • [43] Effects of cavity inclination on mixed convection heat transfer in lid-driven cavity flows
    Cheng, T. S.
    Liu, W. -H.
    COMPUTERS & FLUIDS, 2014, 100 : 108 - 122
  • [44] Mixed convection in a lid-driven square cavity with heat sources using nanofluids
    Zeghbid, Ilhem (leap.mechanical@gmail.com), 1600, Tech Science Press (13):
  • [45] Mixed convection heat transfer in a lid-driven cavity with a rotating circular cylinder
    Khanafer, Khalil
    Aithal, S. M.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2017, 86 : 131 - 142
  • [46] Mixed convection of a viscoplastic fluid with a variable yield stress in a lid-driven cavity
    Rezaee, Danial
    Samari, Alireza
    Azad, Amirreza
    PHYSICS OF FLUIDS, 2024, 36 (03)
  • [47] Mixed convection characteristics in lid-driven cavity containing heated triangular block
    Krunal M.Gangawane
    B.Manikandan
    Chinese Journal of Chemical Engineering, 2017, 25 (10) : 1381 - 1394
  • [48] Mixed convection of EG/NEPCM inside a lid-driven cavity with a rotating cylinder
    Zhang, Yang
    Lin, Haitao
    Chaturvedi, Rishabh
    Singh, Pradeep Kumar
    Mansir, Ibrahim B.
    Zhang, KePing
    Alhoee, Javid
    CASE STUDIES IN THERMAL ENGINEERING, 2023, 47
  • [49] Influence of Interior Angle on Pure Mixed Convection of Lid-Driven Parallelogram Cavity
    Subedi, S.
    Barua, S.
    Hasan, M. A.
    Saha, S.
    Islam, M. Q.
    7TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING (ICTE), 2017, 1851
  • [50] Numerical study on mixed convection in an inclined lid-driven cavity with discrete heating
    Sivasankaran, S.
    Sivakumar, V.
    Hussein, Ahmed Kadhim
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2013, 46 : 112 - 125
12345