Force sensing for dynamic gripping, using a piezoelectric sensor

被引：1
|
作者：
Jackson, Cornelius [1 ]
Vermaak, Herman [1 ]
Jordaan, Gerrit [1 ]
机构：
[1] Cent Univ Technol, Sch Elect & Comp Syst Engn, Bloemfontein, South Africa
来源：
2007 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, PROCEEDINGS, VOLS 1-8 | 2007年
基金：
新加坡国家研究基金会;
关键词：
D O I：
10.1109/ISIE.2007.4374800
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
There is a quest in the field of robotics for an automated dynamic gripper with characteristics as close as possible to that of the human hand. In this paper an automated robot gripper is described that achieves preset levels of gripping force for a certain task. It utilises dynamic gripping through the use of piezoelectric sensors. Analysis of the output pulse from the piezoelectric film indicates the velocity of gripping, deceleration and the total force the gripper is inducing on the gripped object. Piezoelectric film is chosen for its superior sensitivity and structural simplicity over the typical metal-foil strain gauges. The paper shows that, compared to three dimensional analysis, object handling using dynamic fingertip force sensing is a cheaper and more accurate solution.
引用
收藏
页码：1371 / +
页数：2
相关论文
共 50 条
  • [41] Design and Simulation of 1-DOF Tactile Sensor for Gripping Force Measurement
    Amarasinghe, Y. W. R.
    Kulasekera, A. L.
    Priyadarshana, T. G. P.
    2013 8TH IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL AND INFORMATION SYSTEMS (ICIIS), 2013, : 399 - 402
  • [42] Broadband modeling and precise control of piezoelectric sensing-actuating system for dynamic force output
    Li, Qing
    Liu, Lei
    JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS, 2020, 357 (08): : 4524 - 4542
  • [43] Inverse estimation of impact force on a composite panel using a single piezoelectric sensor
    Kalhori, Hamed
    Ye, Lin
    Mustapha, Samir
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2017, 28 (06) : 799 - 810
  • [44] High stability piezoelectric force sensor.
    Audigier, D
    Richard, C
    Descamps, C
    Eyraud, L
    ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 1995, 20 (7-8): : 457 - 460
  • [45] Measurement of normal and shear forces during refining using a piezoelectric force sensor
    Senger, J
    Siadat, A
    Ouellet, D
    Wild, R
    JOURNAL OF PULP AND PAPER SCIENCE, 2004, 30 (09): : 247 - 251
  • [46] Piezoelectric bimorph charge mode force sensor
    Kursu, Olli
    Kruusing, Arvi
    Pudas, Marko
    Rahkonen, Timo
    SENSORS AND ACTUATORS A-PHYSICAL, 2009, 153 (01) : 42 - 49
  • [47] Dynamic Force Sensing Using an Optically Trapped Probing System
    Huang, Yanan
    Cheng, Peng
    Menq, Chia-Hsiang
    IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2011, 16 (06) : 1145 - 1154
  • [48] Development of a piezoelectric force sensor for a chip refiner
    Siadat, A
    Bankes, A
    Wild, PM
    Senger, J
    Ouellet, D
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2003, 217 (E2) : 133 - 140
  • [49] Chucking System With Built-in Sensor Unit for Gripping Force Monitoring in High Force Electromechanical Actuator
    Paul, Sarbajit
    Shin, Homin
    Chang, Junghwan
    Yun, Yongseon
    IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2024, 20 (09) : 10738 - 10749
  • [50] Organic vapour sensing using a coated piezoelectric quartz crystal sensor array
    Ali, Z
    O'Hare, L
    Sarkodie-Gyan, T
    Theaker, B
    Watson, E
    ENVIRONMENTAL MONITORING AND REMEDIATION TECHNOLOGIES II, 1999, 3853 : 116 - 120
12345