Measurement and analyses of molten nickel-cobalt alloy surface tension

被引:2
|
作者
Xiao Feng [1 ]
Liu Lanxiao [1 ]
Fang Liang [2 ]
Yang Renhui [1 ]
Fu Ya [1 ]
Zhao Hongkai [1 ]
机构
[1] Chongqing Inst Technol, Mat Interfacial Phys Chem Res Inst, Chongqing 400050, Peoples R China
[2] Chongqing Univ, Chongqing 400044, Peoples R China
关键词
surface tension; Ni-Co alloys; segregation;
D O I
10.1016/S1875-5372(09)60007-2
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Ni-Co super-alloy is widely used in high temperature and corrosive environments such as gas turbine engines and heat exchangers. The surface tensions of molten Ni and Ni-Co (5 and 10 mass fraction) alloys were measured at the temperature range of 1773 similar to 1873 K using an improved sessile drop method with an alumina substrate in an Ar+3%H-2 atmosphere. The surface tensions of molten Ni and Ni-Co (5 and 10 mass fraction) alloys decrease with increasing of temperature. On the basis of experimental data, the surface tension was also theoretically deduced both as functions of concentration and temperature using a model of Butler' equation. The alloy element segregation in this system was calculated. Cobalt concentration on surface of alloys is lower than that in bulk.
引用
收藏
页码:255 / 258
页数:4
相关论文
共 50 条
  • [41] Corrosion behaviour of super-hydrophobic electrodeposited nickel-cobalt alloy film
    Khorsand, S.
    Raeissi, K.
    Ashrafizadeh, F.
    Arenas, M. A.
    Conde, A.
    APPLIED SURFACE SCIENCE, 2016, 364 : 349 - 357
  • [42] A nanostructured nickel-cobalt alloy with an oxide layer for an efficient oxygen evolution reaction
    Wu, Lian-Kui
    Wu, Wei-Yao
    Xia, Jie
    Cao, Hua-Zhen
    Hou, Guang-Ya
    Tang, Yi-Ping
    Zheng, Guo-Qu
    JOURNAL OF MATERIALS CHEMISTRY A, 2017, 5 (21) : 10669 - 10677
  • [43] Atomic ruthenium modification of nickel-cobalt alloy for enhanced alkaline hydrogen evolution
    Li, Liuqing
    Qiu, Haifa
    Zhu, Yanping
    Chen, Gao
    She, Sixuan
    Guo, Xuyun
    Li, Hao
    Liu, Tiancheng
    Lin, Zezhou
    Zhou, Hanmo
    Zhu, Ye
    Yang, Ming
    Xu, Baomin
    Huang, Haitao
    APPLIED CATALYSIS B-ENVIRONMENT AND ENERGY, 2023, 331
  • [44] Production of Nickel-Cobalt Concentrate in Rhenium-Containing Refractory Alloy Processing
    Chernyshova, O. V.
    Kanagatov, D. K.
    Drobot, D. V.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2017, 58 (01) : 55 - 60
  • [45] TENSILE PROPERTIES OF ELECTRODEPOSITED NICKEL-COBALT
    WALTER, RJ
    PLATING AND SURFACE FINISHING, 1986, 73 (10): : 48 - 53
  • [46] Indonesian nickel-cobalt mine planned
    不详
    MINING ENGINEERING, 2001, 53 (01) : 14 - 14
  • [47] MAGNETOCRYSTALLINE ANISOTROPY OF NICKEL-COBALT ALLOYS
    KADOWAKI, S
    TAKAHASHI, M
    JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, 1975, 38 (06) : 1612 - 1619
  • [48] Nickel-cobalt alloy coating protects steel fasteners from hydrogen embrittlement
    1600, National Assoc. of Corrosion Engineers International (56):
  • [49] Surface tension of molten nickel-chromium alloy - art. no. 60402M
    Xiao, F
    Du, CH
    Fu, Y
    Yang, RH
    Yao, P
    ICMIT 2005: Mechatronics, MEMS, and Smart Materials, 2005, 6040 : M402 - M402
  • [50] NICKEL-COBALT CATALYSTS IN HYDROGENATION OF BENZENE
    SOKOLSKI.DV
    POPOV, NI
    BIZHANOV, FB
    POTEMKIN, LV
    RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY,USSR, 1970, 44 (07): : 1008 - &