Measurement and analyses of molten nickel-cobalt alloy surface tension

被引：2
|
作者：
Xiao Feng [1 ]
Liu Lanxiao [1 ]
Fang Liang [2 ]
Yang Renhui [1 ]
Fu Ya [1 ]
Zhao Hongkai [1 ]
机构：
[1] Chongqing Inst Technol, Mat Interfacial Phys Chem Res Inst, Chongqing 400050, Peoples R China
[2] Chongqing Univ, Chongqing 400044, Peoples R China
来源：
RARE METAL MATERIALS AND ENGINEERING | 2008年 / 37卷 / 02期
关键词：
surface tension; Ni-Co alloys; segregation;
D O I：
10.1016/S1875-5372(09)60007-2
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ni-Co super-alloy is widely used in high temperature and corrosive environments such as gas turbine engines and heat exchangers. The surface tensions of molten Ni and Ni-Co (5 and 10 mass fraction) alloys were measured at the temperature range of 1773 similar to 1873 K using an improved sessile drop method with an alumina substrate in an Ar+3%H-2 atmosphere. The surface tensions of molten Ni and Ni-Co (5 and 10 mass fraction) alloys decrease with increasing of temperature. On the basis of experimental data, the surface tension was also theoretically deduced both as functions of concentration and temperature using a model of Butler' equation. The alloy element segregation in this system was calculated. Cobalt concentration on surface of alloys is lower than that in bulk.
引用
收藏
页码：255 / 258
页数：4
相关论文
共 50 条
  • [1] Measurement and analyses of molten nickel-cobalt alloy surface tension
    Chongqing Institute of Technology, Chongqing 400050, China
    不详
    Xiyou Jinshu Cailiao Yu Gongcheng, 2008, 2 (255-258):
  • [2] ELECTROCHEMICAL SEPARATION OF NICKEL FROM A NICKEL-COBALT ALLOY IN A MOLTEN SALT ELECTROLYTE
    SULLIVAN, TA
    CATTOIR, FR
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1963, 110 (08) : C180 - C180
  • [3] Surface tension of molten nickel-tungsten alloy
    Xiao, Feng
    Liu, Lanxiao
    Yang, Renhui
    Fu, Ya
    Fang, Liang
    Zhao, Hongkai
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2008, 37 (08): : 1352 - 1355
  • [4] Surface tension of molten nickel-tungsten alloy
    Xiao Feng
    Liu Lanxiao
    Yang Renhui
    Fu Ya
    Fang Liang
    Zhao Hongkai
    RARE METAL MATERIALS AND ENGINEERING, 2008, 37 (08) : 1352 - 1355
  • [5] Effect of Cobalt Concentration on the Microstructure of Nickel-Cobalt Alloy Deposits
    Marita, Yusrini
    Ridwan
    ADVANCES IN MATERIALS AND MATERIALS PROCESSING IV, PTS 1 AND 2, 2014, 887-888 : 749 - 752
  • [6] Nickel-cobalt alloy nanosheets obtained from reductive hydrothermal-treatment of nickel-cobalt hydroxide carbonate
    Ghotbi, Mohammad Yeganeh
    Jolagah, Ali
    Afrasiabi, Hasan-ali
    MATERIALS RESEARCH BULLETIN, 2012, 47 (03) : 631 - 634
  • [7] Preparation of coating of carbon nanotube with nickel-cobalt alloy
    Hunan Univ, Changsha, China
    Weixi Jiagong Jishu, 2 (17-22):
  • [8] Preparation and properties of alumina/nickel-cobalt alloy nanocomposites
    Oh, ST
    Sando, M
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1998, 81 (11) : 3013 - 3015
  • [9] ELECTROCHEMICAL STUDY OF OXYGEN ADSORPTION ON A NICKEL-COBALT ALLOY
    RYASINTSEVA, NI
    KHRUSHCHEVA, EI
    TRUNOV, AM
    SHUMILOVA, NA
    PRESNOV, VA
    SOVIET ELECTROCHEMISTRY, 1975, 11 (03): : 339 - 342
  • [10] Surface nitridation of nickel-cobalt alloy nanocactoids raises the performance of water oxidation and splitting
    Gao, Xiaorui
    Yu, Yong
    Liang, Qirui
    Pang, Yajun
    Miao, Linqing
    Liu, Ximeng
    Kou, Zongkui
    He, Jiaqing
    Pennycook, Stephen J.
    Mu, Shichun
    Wang, John
    APPLIED CATALYSIS B-ENVIRONMENTAL, 2020, 270
12345