Microstructure-Based Modelling and Digital Image Correlation Measurement of (Residual) Strain Fields in Austenitic Stainless Steel 316L During Tension Loading

被引：0
|
作者：
Herrera-Solaz, V. [1 ]
Patriarca, L. [2 ]
Segurado, J. [3 ]
Niffenegger, M. [1 ]
机构：
[1] Paul Scherrer Inst, Nucl Energy & Safety Res Dept, CH-5232 Villigen, Switzerland
[2] Politecn Milan, Dept Mech Engn, I-20156 Milan, Italy
[3] IMDEA Mat Inst, C Eric Kandel 2, Madrid, Spain
来源：
PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON THEORETICAL, APPLIED AND EXPERIMENTAL MECHANICS | 2019年 / 5卷
关键词：
DIC; Crystal plasticity finite element; EBSD; Microstructure;
D O I：
10.1007/978-3-319-91989-8_66
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The present work aims to compare the residual strain fields of the austenitic stainless steel 316L samples under specific loading conditions, obtained by different techniques. Experimentally, Digital Image Correlation (DIC) technique is used to track the (residual) strain maps during the specimen loading. Microstructure-based Finite Element (FE) models based on two different approaches for the material behavior (Crystal Plasticity (CP) and SNF) provide the numerical results. The quality of the outcomes reinforces the use of a combination of these techniques to study the residual strain locations in the microstructure, as well as its evolution during the deformation process. Whereas the results based on CP and SNF showed good agreement, some minor differences between calculated and measured (DIC) strains could be observed.
引用
收藏
页码：313 / 314
页数：2
相关论文
共 27 条
  • [1] Microstructure-based modelling and Digital Image Correlation measurement of strain fields in austenitic stainless steel 316L during tension loading
    Herrera-Solaz, V.
    Patriarca, L.
    Folettib, S.
    Segurado, J.
    Niffenegger, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 751 : 99 - 106
  • [2] Effect of Combined Torsion and Tension on the Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel
    Jidong Zhang
    Zhenyi Huang
    Wenliang Rui
    Jiaxing Li
    Yuyu Tian
    Jinghui Li
    Journal of Materials Engineering and Performance, 2019, 28 : 5691 - 5701
  • [3] Effect of Combined Torsion and Tension on the Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel
    Zhang, Jidong
    Huang, Zhenyi
    Rui, Wenliang
    Li, Jiaxing
    Tian, Yuyu
    Li, Jinghui
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (09) : 5691 - 5701
  • [4] Correlation between microstructure and micro-hardness of 316L nitrided austenitic stainless steel
    Hussain, P.
    Mahmoud, H.
    Basha, S. N.
    Mohamad, A., I
    SYMPOSIUM ON ENERGY SYSTEMS 2019 (SES 2019), 2020, 863
  • [5] MICROSTRUCTURAL BASED FEM-CALCULATION OF STRESS/STRAIN FIELDS IN STEEL AISI 316L AND ITS VALIDATION BY DIGITAL IMAGE CORRELATION
    Niffenegger, M.
    Solaz, V. Herrera
    PROCEEDINGS OF ASME 2021 PRESSURE VESSELS AND PIPING CONFERENCE (PVP2021), VOL 2, 2021,
  • [6] Effect on corrosion resistance of microstructure of 316L austenitic stainless steel subjected to combined torsion-tension deformation
    Zhang, Jidong
    Han, Weixue
    Rui, Wenliang
    Li, Jinghui
    Huang, Zhenyi
    Sui, Fengli
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2020, 111 (05) : 405 - 415
  • [7] Effect on corrosion resistance of microstructure of 316L austenitic stainless steel subjected to combined torsion-tension deformation
    Zhang J.
    Han W.
    Rui W.
    Li J.
    Huang Z.
    Sui F.
    International Journal of Materials Research, 2021, 111 (05) : 405 - 415
  • [8] Different Evolutions of the Microstructure, Texture, and Mechanical Performance During Tension and Compression of 316L Stainless Steel
    El-Tahawy, Moustafa
    Jenei, Peter
    Kolonits, Tamas
    Han, Gigap
    Park, Hyeji
    Choe, Heeman
    Gubicza, Jeno
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (07): : 3447 - 3460
  • [9] Different Evolutions of the Microstructure, Texture, and Mechanical Performance During Tension and Compression of 316L Stainless Steel
    Moustafa El-Tahawy
    Péter Jenei
    Tamás Kolonits
    Gigap Han
    Hyeji Park
    Heeman Choe
    Jenő Gubicza
    Metallurgical and Materials Transactions A, 2020, 51 : 3447 - 3460
  • [10] The Effect of Strain Rate on Hydrogen-Assisted Deformation Behavior and Microstructure in AISI 316L Austenitic Stainless Steel
    Astafurova, Elena
    Fortuna, Anastasiya
    Melnikov, Evgenii
    Astafurov, Sergey
    MATERIALS, 2023, 16 (08)
123