A method for stable carbon isotope ratio and concentration measurements of ambient aromatic hydrocarbons

A technique for compound-specific analysis of stable carbon isotope ratios and concentration of ambient volatile organic compounds (VOCs) is presented. It is based on selective VOC sampling onto adsorbent-filled cartridges by passing large volumes of air (up to 80 L) through the cartridge. The hydrocarbons are recovered by thermal desorption followed by two-step cryogenic trapping and then are separated by gas chromatography in the laboratory. Once separated, individual VOCs are subjected to online oxidation in a combustion interface and isotope ratio analysis by isotope ratio mass spectrometry. The method allows measurements of stable carbon isotope ratios of ambient aromatic VOCs present in low pptV to ppbV levels with an accuracy of typically better than 0.5 parts per thousand. The precision of concentration measurements is better than 10%. Examples of measurements conducted as part of a joint Environment Canada-York University (EC-YU) measurement campaign at a semi-rural location demonstrate that the ability to make accurate measurements in air with low VOC mixing ratios is important to avoid bias from an overrepresentation of samples that are strongly impacted by recent emissions.