Shock-wave hardening and dynamic properties of a nitrogen alloyed austenitic steel of the Fe-Cr-Ni-system

被引：1
|
作者：
Lach, E [1 ]
Lichtenberger, A [1 ]
Fréchard, S [1 ]
机构：
[1] French German Res Inst St Louis, ISL, St Louis, France
来源：
FUNDAMENTAL ISSUES AND APPLICATIONS OF SHOCK-WAVE AND HIGH-STRAIN-RATE PHENOMENA, PROCEEDINGS | 2001年
关键词：
D O I：
10.1016/B978-008043896-2/50113-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An austenitic nitrogen alloyed steels with high nickel contents has been investigated. Specimens have been shockloaded with pressure peaks from 100 to 600 kbar. It can be shown that the rise in hardness increases mostly from 500 to 600 kbar. From the shockloaded plates tensile and compression specimens have been drawn. For strongly shocked specimens quasistatic tensile tests show no uniform elongation but a very high tensile stress. Dynamic compression tests have been performed also. The fracture of specimens was characterized by scanning electron microscopy. Metallographic investigations have been also performed.
引用
收藏
页码：165 / 171
页数：7
相关论文
共 50 条
  • [41] Tensile properties and strain hardening mechanism of Cr-Mn-Si-Ni alloyed ultra-strength steel at different temperatures and strain rates
    Zhang, Jing-Yu
    Jiang, Ping
    Zhu, Ze-lin
    Chen, Qiang
    Zhou, Jie
    Meng, Yi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 842
  • [42] Microstructure and Properties of 08Cr19Mn6Ni3Cu2N (QN1803) High Strength Nitrogen Alloyed Low Nickel Austenitic Stainless Steel
    Jiang Yi
    Cheng Manlang
    Jiang Haihong
    Zhou Qinglong
    Jiang Meixue
    Jiang Laizhu
    Jiang Yiming
    ACTA METALLURGICA SINICA, 2020, 56 (04) : 642 - 652
  • [43] Mechanical properties of austenitic heat-resistant Fe-20Cr-30Ni-2Nb steel at ambient temperature
    Kanno, Naoya
    Yoshimura, Kazuhiro
    Takata, Naoki
    Tarigan, Imanuel
    Takeyama, Masao
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 662 : 551 - 563
  • [44] Properties of Fe-Cr-Mn-N Austenitic Stainless Steel Thick Cladding Coating Prepared by Laser Melting Deposition Using Mechanical Alloyed Powders
    Gao, Shuailong
    Sun, Defu
    Gu, Zhen
    Sun, Chongfeng
    Xi, Shengqi
    Peng, Wenshan
    Su, Chengming
    Wang, Chunchang
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2022, 51 (01): : 321 - 326
  • [45] Properties of Fe-Cr-Mn-N Austenitic Stainless Steel Thick Cladding Coating Prepared by Laser Melting Deposition Using Mechanical Alloyed Powders
    Gao Shuailong
    Sun Defu
    Gu Zhen
    Sun Chongfeng
    Xi Shengqi
    Peng Wenshan
    Su Chengming
    Wang Chunchang
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (01) : 321 - 326
  • [46] Effect of ultrasonic-assisted surface plastic deformation on the microstructures and tensile properties of discrete laser hardening treated Cr-Ni-Mo alloyed steel
    Hu, Xiongfeng
    Guan, Huashen
    Chen, Zengtao
    He, Xiaofei
    Wang, Maoqiu
    Qu, Shengguan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 862
  • [47] Effect of Cl- on Passivation Properties of Fe-20Cr-20Mn-0.75N High Nitrogen Austenitic Stainless Steel
    Zhang, Wentao
    Gao, Fengyin
    Zhou, Huiling
    Li, Chengtao
    Liu, Zhong
    Yang, Haokun
    Qiao, Yanxin
    COATINGS, 2024, 14 (03)
  • [48] Influence of Rolling Temperature on Structure, Phase Composition and Mechanical Properties of Austenitic Steel Fe-17Cr-13Ni-3Mo
    Melnikov, Eugene
    Kozlova, Tatiana
    Maier, Galina
    Vinokurov, Vladimir
    Astafurova, Elena
    INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2015, 2015, 1683
  • [49] Dynamic Strain Aging Induced by Synergistic Effects of Deformation-Induced Martensite and Deformation Twins in Fe–Cr–Ni Metastable Austenitic Stainless Steel
    Ang Xie
    Shenghu Chen
    Lijian Rong
    Metallurgical and Materials Transactions A, 2023, 54 : 4592 - 4597
  • [50] Solid solution-hardening by hydrogen in Fe-Cr-Ni-based austenitic steel studied by strain rate sensitivity measurement: Contributions of effective stress and solute drag
    Ogawa, Yuhei
    Fujita, Takeshi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 911
12345