A nanoindentation analysis of the effects of microstructure on elastic properties of Al2O3/SiC composites

被引:23
|
作者
Ling, Zhong [1 ]
Hou, Jinping
机构
[1] Chinese Acad Sci, Inst Mech, LNM, Beijing 100080, Peoples R China
[2] Zhengzhou Univ, Dept Mech Engn, Zhengzhou 450052, Peoples R China
基金
中国国家自然科学基金;
关键词
ceramic matrix composites (CMCs); microstructures; elastic properties; nanoindentation test;
D O I
10.1016/j.compscitech.2007.04.022
中图分类号
TB33 [复合材料];
学科分类号
摘要
Nanoindentation tests were carried out to investigate certain elastic properties of Al2O3/SiCp composites at microscopic scales (nm up to mu m) and under ultra-low loads from 3 mN to 250 mN, with special attention paid to effects caused by SiC particles and pores. The measured Young's modulus depends on the volume fraction of SiC particles and on the composite porosity and it can compare with that of alumina. The Young's modulus exhibits large scatters at small penetrations, but it tends to be constant with lesser dispersion as the indentation depth increases. Further analysis indicated that the scatter results from specific microstructural heterogeneities. The measured Young's moduli are in agreement with predictions, provided the actual role of the microstructure is taken into account. (C) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码:3121 / 3129
页数:9
相关论文
共 50 条
  • [21] Processing, Microstructure and Mechanical Properties of Al2O3 and SiC Reinforced Magnesium Metal Matrix Hybrid Composites
    Karthick, E.
    Mathai, Joel
    Michael, Tony J.
    Marikkannan, Senthil Kumar
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (06) : 6750 - 6756
  • [22] Microstructure and mechanical properties of Al2O3/SiC nanocomposites prepared by SPS
    Li, RT
    Pan, W
    Pan, ZX
    HIGH-PERFORMANCE CERAMICS 2001, PROCEEDINGS, 2002, 224-2 : 337 - 340
  • [23] Microstructure and mechanical properties of hot pressed Al2O3/SiC nanocomposites
    Parchoviansky, M.
    Galusek, D.
    Sedlacek, J.
    Svancarek, P.
    Kasiarova, M.
    Dusza, J.
    Sajgalik, P.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (12) : 2291 - 2298
  • [24] The Effects of Al2O3 Amount on the Microstructure and Properties of Fe-Cr Matrix Composites
    Shamsuddin, Saidatulakmar
    Jamaludin, Shamsul Baharin
    Hussain, Zuhailawati
    Ahmad, Zainal Arifin
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (13): : 3452 - 3457
  • [25] The Effects of Al2O3 Amount on the Microstructure and Properties of Fe-Cr Matrix Composites
    Saidatulakmar Shamsuddin
    Shamsul Baharin Jamaludin
    Zuhailawati Hussain
    Zainal Arifin Ahmad
    Metallurgical and Materials Transactions A, 2010, 41 : 3452 - 3457
  • [26] Effect of supercritical drying method on microstructure and properties of Al2O3 composites reinforced with ultrafine SiC particulate
    Nakahira, A
    Murao, T
    Takeda, S
    Tajika, M
    Sekino, T
    Choa, YH
    Niihara, K
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1999, 107 (05) : 460 - 464
  • [27] Microstructure and mechanical properties of two kinds of Al2O3/SiC nanocomposites
    Liu, HL
    Huang, CZ
    Wang, J
    Sun, J
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 : 243 - 247
  • [28] Microstructure and mechanical properties of pressureless sintered Al2O3/SiC nanocomposites
    Jeong, Y.K.
    Niihara, K.
    Nanostructured Materials, 9 (1-8): : 193 - 196
  • [29] Microstructure and mechanical properties of pressureless sintered Al2O3/SiC nanocomposites
    Jeong, YK
    Niihara, K
    NANOSTRUCTURED MATERIALS, 1997, 9 (1-8): : 193 - 196
  • [30] Evolution of microstructure and mechanical properties in laser induced reaction coating of Al2O3 on SiC/Al2O3 composite
    Dahotre, NB
    Xiao, C
    Boss, W
    McCay, MH
    McCay, TD
    ELEVATED TEMPERATURE COATINGS: SCIENCE AND TECHNOLOGY II, 1996, : 441 - 452