Error analysis and compensation of three-axis strap-down magnetometers

被引：0
|
作者：
Lin Xueyuan [1 ]
Chen Yulin [1 ]
Zhou Min [1 ]
机构：
[1] Naval Aeronaut Engn Inst, Dept Elect, Yantai 264001, Peoples R China
来源：
ICEMI 2007: PROCEEDINGS OF 2007 8TH INTERNATIONAL CONFERENCE ON ELECTRONIC MEASUREMENT & INSTRUMENTS, VOL I | 2007年
关键词：
vehicle navigation system; magnetic-resistive magnetometer; magnetic azimuth; error compensation;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Three-axis Strap-down Magnetometers can be used to determine the magnetic heading angle. The magnetometers are widely being employed in vehicle navigation systems. But The precision is enormously affected by additional magnetic field, which is generated by ferrous material and electric devices in the vehicles. In this paper, the basic principle calculating the magnetic azimuth of the body according to outputs of magnetometers is introduced. Then the paper provides the analysis about the error of the magnetic azimuth and the relationship of the error and the interferential magnetic field. The compensation method is also presented and the experimental result shows that the method is effective.
引用
收藏
页码：294 / 297
页数：4
相关论文
共 50 条
  • [41] Real-time error compensation of a three-axis machine tool using a laser tracker
    Wang, Zheng
    Maropolous, Paul G.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 69 (1-4): : 919 - 933
  • [42] Real-time error compensation of a three-axis machine tool using a laser tracker
    Wang, Z. (zw215@bath.ac.uk), 1600, Springer London (69): : 1 - 4
  • [43] Accuracy improvement of three-axis CNC machining centers by quasi-static error compensation
    Chen, XB
    Geddam, A
    Yuan, ZJ
    JOURNAL OF MANUFACTURING SYSTEMS, 1997, 16 (05) : 323 - 336
  • [44] ALLAN VARIANCE ANALYSIS OF THE MINIATURIZED SENSORS IN A STRAP-DOWN INERTIAL MEASUREMENT UNIT
    Grigorie, Teodor Lucian
    Obreja, Radu
    Sandu, Dragos George
    Corcau, Jenica Ileana
    12TH INTERNATIONAL MULTIDISCIPLINARY SCIENTIFIC GEOCONFERENCE, SGEM 2012, VOL. III, 2012, : 443 - 450
  • [45] Real-time error compensation of a three-axis machine tool using a laser tracker
    Zheng Wang
    Paul G. Maropolous
    The International Journal of Advanced Manufacturing Technology, 2013, 69 : 919 - 933
  • [46] The Direction Cosine Matrix extracting method of accelerometer dynamic error in the strap-down Inertial Measuring System
    Li, GG
    Zhang, XE
    ISTM/2005: 6th International Symposium on Test and Measurement, Vols 1-9, Conference Proceedings, 2005, : 4127 - 4129
  • [47] Improved Principal Component Analysis for Magnetic Gradient Signal Detection Using Dual Three-Axis Magnetometers
    Yang, Hongyi
    Zheng, Jianying
    Hu, Qinglei
    Cui, Yong
    IEEE SENSORS JOURNAL, 2025, 25 (07) : 10922 - 10933
  • [48] Geometric Error Identification of a Three-Axis Machining Center
    Liang Guiqiang
    Zhang Junxian
    Zhao Feifei
    MANUFACTURING PROCESS AND EQUIPMENT, PTS 1-4, 2013, 694-697 : 1803 - 1807
  • [49] Calibration method for sway error of three-axis fluxgate
    Xu, L.
    Yan, B.
    Liu, G. Q.
    Gu, H. C.
    Pang, Y. D.
    Luo, Y.
    JOURNAL OF INSTRUMENTATION, 2021, 16 (08)
  • [50] Disturbance Rejection Rate Analysis and Parasitical Loop Filter Design for Strap-down Seeker
    Tian Yuan
    Wang Linlin
    Wang Yonghai
    Zhang Mingxing
    Lu Baogang
    2018 IEEE CSAA GUIDANCE, NAVIGATION AND CONTROL CONFERENCE (CGNCC), 2018,
12345