Foam-Metal Casing Treatment on an Axial Flow Compressor: Stability Improvement and Noise Reduction

被引：13
|
作者：
Sun, Dakun [1 ]
Li, Jia [1 ]
Dong, Xu [1 ]
Xu, Ruize [1 ]
Sun, Xiaofeng [1 ]
机构：
[1] Beihang Univ, Sch Energy & Power Engn, 37 Xueyuan Rd, Beijing 100191, Peoples R China
来源：
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME | 2022年 / 144卷 / 01期
基金：
中国国家自然科学基金;
关键词：
compressor; stall margin; casing treatment; noise; compressor stall; foam metal; STALL INCEPTION; FAN NOISE;
D O I：
10.1115/1.4051782
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A set of foam metal casing treatment (FMCT) has been investigated to assess the stability improvement and noise reduction on an axial compressor. Three FMCTs with different PPI (Pores Per Inch), 20, 35, and 50, are tested experimentally. Two installation locations of foam metal in the casing are also considered and investigated. At location 1, it is found that the FMCT improves the stall margin by 5.4-8.7%, and the attenuation of compressor noise is up to 5 dB. At location 2, the stall margin is extended by 22.2-37.1% but increasing the noise mostly. Besides, foam metal at location 1 causes less efficiency loss than that at location 2. Based on the analysis in near-casing pressure distribution, spanwise performance comparison, and stall process, the mechanism of the FMCT for enhancing the compressor stability is also discussed.
引用
收藏
页数：12
相关论文
共 50 条
  • [21] Stability management of high speed axial flow compressor stage through axial extensions of bend skewed casing treatment
    Alone, Dilipkumar Bhanudasji
    Kumar, S. Satish
    Thimmaiah, Shobhavathy M.
    Mudipalli, Janaki Rami Reddy
    Pradeep, A. M.
    Ramamurthy, Srinivasan
    Iyengar, Venkat S.
    PROPULSION AND POWER RESEARCH, 2016, 5 (03) : 236 - 249
  • [22] EFFECTS OF CASING TREATMENT ON A SMALL, TRANSONIC AXIAL-FLOW COMPRESSOR
    HOLMAN, FF
    KIDWELL, JR
    MECHANICAL ENGINEERING, 1976, 98 (02) : 81 - 81
  • [23] Design and Stability Enhancement Mechanism of Axial-Slot Casing Treatment on a Mixed-Flow Compressor
    Du, Juan
    Zhang, Qian-Feng
    Wang, Si-Chen
    Zhang, Hong-Wu
    Nie, Chao-Qun
    Seume, Joerg R
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2019, 40 (04): : 751 - 758
  • [24] THE STABILITY-LIMITING FLOW MECHANISMS IN A SUBSONIC AXIAL-FLOW COMPRESSOR AND ITS PASSIVE CONTROL WITH CASING TREATMENT
    Lu, Xingen
    Zhu, Junqiang
    Nie, Chaoqun
    Huang, Weiguang
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 6, PT A, 2008, : 33 - 43
  • [25] Study of sloped trench casing treatment on performance and stability of a transonic axial compressor
    Zhang, Hui
    Ma, Hongwei
    Proceedings of the ASME Turbo Expo 2007, Vol 6, Pts A and B, 2007, : 399 - 404
  • [26] EFFECT OF ROTOR TIP CASING TREATMENT ON THE PERFORMANCE AND STABILITY OF A TRANSONIC AXIAL COMPRESSOR
    Shivaramaiah, Subbaramu
    Varpe, Mahesh K.
    Afzal, Mohammed
    PROCEEDINGS OF ASME 2021 GAS TURBINE INDIA CONFERENCE (GTINDIA2021), 2021,
  • [27] Stall Margin Improvement in a Transonic Compressor With a Casing Treatment: Flow Mechanism
    Hah, Chunill
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2023, 145 (04):
  • [28] STALL MARGIN IMPROVEMENT IN A TRANSONIC COMPRESSOR WITH A CASING TREATMENT: FLOW MECHANISM
    Hah, Chunill
    PROCEEDINGS OF ASME TURBO EXPO 2022: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2022, VOL 10A, 2022,
  • [29] Stall Behaviour in a Mixed-flow Compressor with Axial Slot Casing Treatment
    QIU Jiahui
    ZHANG Qianfeng
    ZHANG Min
    DU Juan
    ZHANG Wenqiang
    MAROLDT Niklas
    SEUME Joerg R.
    Journal of Thermal Science, 2022, 31 (01) : 13 - 24
  • [30] Stall Behaviour in a Mixed-flow Compressor with Axial Slot Casing Treatment
    Qiu Jiahui
    Zhang Qianfeng
    Zhang Min
    Du Juan
    Zhang Wenqiang
    Maroldt, Niklas
    Seume, Joerg R.
    JOURNAL OF THERMAL SCIENCE, 2022, 31 (01) : 13 - 24
12345