Foam-Metal Casing Treatment on an Axial Flow Compressor: Stability Improvement and Noise Reduction

被引：13
|
作者：
Sun, Dakun [1 ]
Li, Jia [1 ]
Dong, Xu [1 ]
Xu, Ruize [1 ]
Sun, Xiaofeng [1 ]
机构：
[1] Beihang Univ, Sch Energy & Power Engn, 37 Xueyuan Rd, Beijing 100191, Peoples R China
来源：
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME | 2022年 / 144卷 / 01期
基金：
中国国家自然科学基金;
关键词：
compressor; stall margin; casing treatment; noise; compressor stall; foam metal; STALL INCEPTION; FAN NOISE;
D O I：
10.1115/1.4051782
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A set of foam metal casing treatment (FMCT) has been investigated to assess the stability improvement and noise reduction on an axial compressor. Three FMCTs with different PPI (Pores Per Inch), 20, 35, and 50, are tested experimentally. Two installation locations of foam metal in the casing are also considered and investigated. At location 1, it is found that the FMCT improves the stall margin by 5.4-8.7%, and the attenuation of compressor noise is up to 5 dB. At location 2, the stall margin is extended by 22.2-37.1% but increasing the noise mostly. Besides, foam metal at location 1 causes less efficiency loss than that at location 2. Based on the analysis in near-casing pressure distribution, spanwise performance comparison, and stall process, the mechanism of the FMCT for enhancing the compressor stability is also discussed.
引用
收藏
页数：12
相关论文
共 50 条
  • [1] Foam-Metal Casing Treatment on an Axial Flow Compressor: Stability Improvement and Noise Reduction
    Sun, Dakun
    Li, Jia
    Dong, Xu
    Xu, Ruize
    Sun, Xiaofeng
    Journal of Turbomachinery, 2022, 144 (01):
  • [2] Stability Enhancement and Noise Reduction of an Axial Compressor with Foam Metal Casing Treatment
    Li, Jia
    Dong, Xu
    Sun, Dakun
    Wang, Yuqing
    Geng, Chunwang
    Sun, Xiaofeng
    AEROSPACE, 2022, 9 (10)
  • [3] Effects of the foam metal casing treatment on aerodynamic stability and aerocoustic noise in an axial flow compressor
    Sun, Dakun
    Li, Jia
    Xu, Ruize
    Dong, Xu
    Zhao, Dan
    Sun, Xiaofeng
    AEROSPACE SCIENCE AND TECHNOLOGY, 2021, 115
  • [4] A STUDY OF STALL PROCESS IN AN AXIAL FLOW COMPRESSOR WITH FOAM METAL CASING TREATMENT
    Li, Jia
    Sun, Dakun
    Xu, Ruize
    Dong, Xu
    Sun, Xiaofeng
    PROCEEDINGS OF ASME TURBO EXPO 2022: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2022, VOL 10D, 2022,
  • [5] Mechanism of improvement on axial-flow compressor stability with assembled casing treatment
    Zhang, Hao-Guang
    Wang, Yun-Peng
    Wu, Jun
    Chu, Wu-Li
    Wu, Yan-Hui
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2015, 30 (01): : 228 - 236
  • [6] EXPERIMENTAL STUDY ON THE SURFACE GEOMETRY OF FOAM-METAL CASING TREATMENT
    Wang, Yuqing
    Sun, Dakun
    Li, Jia
    Zhang, Jinming
    Dong, Xu
    Sun, Xiaofeng
    PROCEEDINGS OF ASME TURBO EXPO 2022: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2022, VOL 5, 2022,
  • [7] EFFECT OF THE FOAM METAL CASING TREATMENT ON A LOW-SPEED AXIAL COMPRESSOR
    Li, Jia
    Sun, Dakun
    Xu, Reize
    Dong, Xu
    Sun, Xiaofeng
    PROCEEDINGS OF THE ASME TURBO EXPO 2020: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 2E, PT II, 2020,
  • [8] Axial Slot Casing Treatment for Stall Margin Improvement in an Axial Flow Compressor With Radial Distortion
    Li, Yihan
    Li, Jichao
    Li, Fan
    Du, Juan
    Zhang, Hongwu
    Nie, Chaoqun
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2022, 43 (05): : 1210 - 1218
  • [9] Stability enhancement using a new hybrid casing treatment in an axial flow compressor
    Li, Jichao
    Du, Juan
    Li, Fan
    Zhang, Qianfeng
    Zhang, Hongwu
    AEROSPACE SCIENCE AND TECHNOLOGY, 2019, 85 : 305 - 319
  • [10] NUMERICAL INVESTIGATION OF AXIAL FLOW COMPRESSOR CASING TREATMENT
    Zhuang PingInstitute of Engineering Thermo physics Lu Ya-jun and Cui Ji-ya (Tsui Chihya)Beijing University of Aeronautics & Astronautics
    Chinese Journal of Aeronautics, 1991, (04) : 369 - 379
12345